Visit JAMI website

HL7 Japan-JAMI ccs ImplementationGuide
0.1.0 - draft JP

HL7 Japan-JAMI ccs ImplementationGuide - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: JP_Patient_eCS - Detailed Descriptions

Active as of 2023-03-31

Definitions for the JP-Patient-eCS resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

診療情報コアサマリー・厚労省6情報などにおける患者情報の格納に使用する

Short診療情報コアサマリーにおける患者情報の格納に使用する
Comments

他のリソースに埋め込まれる(contained要素)患者情報のためには、別のプロファイルが用意されている。

LOINC Code
2. Patient.meta
4. Patient.meta.lastUpdated
Definition

この患者情報の内容がサーバ上で最後に格納または更新された日時、またはこのFHIRリソースが生成された日時

Short最終更新日
Must Supporttrue
6. Patient.meta.source
8. Patient.meta.profile
Control1..?
Must Supporttrue
Fixed Valuehttp://jpfhir.jp/fhir/eCS/StructureDefinition/JP_Patient_eCS
10. Patient.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Must Supporttrue
LOINC Code
12. Patient.identifier.system
Definition

医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)

Short医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)
Control1..?
LOINC Code
14. Patient.identifier.value
Definition

医療機関での患者番号、または保険者・被保険者番号情報

Short医療機関での患者番号、または保険者・被保険者番号情報
Comments

リソースをオン資ネットワークに送信する場合には、保険者・被保険者番号情報は必須。

LOINC Code
16. Patient.identifier.assigner
18. Patient.identifier.assigner.reference
Definition

患者番号を付番した医療機関情報(Organization)への参照

Short患者番号を付番した医療機関情報(Organization)への参照
20. Patient.active
LOINC Code
22. Patient.name
Control1..?
Must Supporttrue
LOINC Code
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension($iso21090-EN-representation).value
24. Patient.name.id
Control0..0
26. Patient.name.extension
28. Patient.name.extension.url
30. Patient.name.extension.value[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Patient.name.extension.value[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
32. Patient.name.extension.value[x]:valueCode
Slice NamevalueCode
Control0..1
Typecode
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
34. Patient.name.use
36. Patient.name.text
Control1..?
38. Patient.name.family
Control1..?
40. Patient.name.given
Control1..1
42. Patient.name.prefix
Control0..0
44. Patient.name.suffix
Control0..0
46. Patient.name.period
Control0..0
48. Patient.name:kanji
Slice Namekanji
Definition

漢字の名前情報

Short漢字の名前情報
Control1..1
Must Supporttrue
50. Patient.name:kanji.extension:nameRepresentationUse
Slice NamenameRepresentationUse
52. Patient.name:kanji.extension:nameRepresentationUse.value[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
Fixed ValueIDE
54. Patient.name:kanji.text
Control1..?
56. Patient.name:kanji.family
Control1..?
58. Patient.name:kanji.given
Control1..1
60. Patient.name:kanji.prefix
Control0..0
62. Patient.name:kanji.suffix
Control0..0
64. Patient.name:kanji.period
Control0..0
66. Patient.name:kana
Slice Namekana
Definition

カタカナの名前情報

Shortカタカナの名前情報
Control0..1
Must Supporttrue
68. Patient.telecom
70. Patient.telecom.system
LOINC Code
72. Patient.telecom.value
LOINC Code
74. Patient.telecom.use
LOINC Code
76. Patient.gender
Control1..?
Must Supporttrue
LOINC Code
78. Patient.birthDate
Control1..?
Must Supporttrue
LOINC Code
80. Patient.address
Definition

An address for the individual. 患者の住所。必須。

Control0..1
LOINC Code
82. Patient.address.use
LOINC Code
84. Patient.address.text
Control1..?
LOINC Code
86. Patient.address.postalCode
Control1..?
LOINC Code
88. Patient.address.country
LOINC Code

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

診療情報コアサマリー・厚労省6情報などにおける患者情報の格納に使用する


ケアまたはその他の健康関連サービスを受けている個人または動物に関する人口統計およびその他の管理情報。 / Demographics and other administrative information about an individual or animal receiving care or other health-related services.

Short診療情報コアサマリーにおける患者情報の格納に使用する医療サービスを受けている個人または動物に関する情報 / Information about an individual or animal receiving health care services
Comments

他のリソースに埋め込まれる(contained要素)患者情報のためには、別のプロファイルが用意されている。

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
2. Patient.meta
Definition

リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Shortリソースに関するメタデータ / Metadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.meta.lastUpdated
Definition

この患者情報の内容がサーバ上で最後に格納または更新された日時、またはこのFHIRリソースが生成された日時


リソースが最後に変更されたとき - 例えば、バージョンが変更されたとき。

Short最終更新日「リソースのバージョンが最後に変更されたとき」
Comments

この値はリソースが初めて作成される場合を除いて常に設定されています。サーバー/リソースマネージャーがこの値を設定します。クライアントが提供する値は関係ありません。これはHTTP Last-Modifiedに相当し、readのインタラクションで同じ値を持つべきです。

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
6. Patient.meta.source
Definition

リソースのソースシステムを識別するURI。これにより、リソース内の情報のソースをトラックまたは区別するために使用できる最小限の[プロビナンス](provenance.html#)情報が提供されます。ソースは、別のFHIRサーバー、ドキュメント、メッセージ、データベースなどを識別できます。

Short「リソースがどこから来たかを特定する」(Risōsu ga doko kara kita ka o tokutei suru)
Comments

「プロバナンスのリソースにおいて、これはProvenance.entity.what[x]に対応します。ソースの正確な使用方法(および含意されるProvenance.entity.role)は実装者の判断に委ねられます。指定されたソースは1つだけです。追加のプロバナンスの詳細が必要な場合は、完全なプロバナンスリソースを使用するべきです。

この要素は、正規のURLでホストされていないリソースの現在のマスターソースがどこにあるかを示すために使用できます。」

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
8. Patient.meta.profile
Definition

このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

Shortこのリソースが適合を主張するプロファイル
Comments

これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

Control10..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuehttp://jpfhir.jp/fhir/eCS/StructureDefinition/JP_Patient_eCS
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
10. Patient.implicitRules
Definition

リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
Comments

このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Patient.extension:religion
Slice Namereligion
Definition

The patient's professed religious affiliations. 患者の公言された宗教的所属。

Short患者の宗教 【詳細参照】
Comments

患者の宗教をValueSet(v3.ReligiousAffiliation)より選択する。輸血や食事で考慮が必要な場合がある。

  • 1013 キリスト教
  • 1020 ヒンドゥー教
  • 1023 イスラム教

など

Control0..*
TypeExtension(religion) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
14. Patient.extension:birthPlace
Slice NamebirthPlace
Definition

The registered place of birth of the patient. A system may use the address.text if they don't store the birthPlace address in discrete elements. 患者の登録された出生地。システムは、birthPlaceアドレスを個別の要素に格納しない場合、address.textを使用してよい。

Short患者の生誕地 【詳細参照】
Comments

患者の生誕地をAddress型で表現する

Control0..1
TypeExtension(Birth Place) (Extension Type: Address)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
16. Patient.extension:race
Slice Namerace
Definition

Optional Extension Element - found in all resources. オプションの拡張要素-すべてのリソースで使用できる。

Short患者の人種 【詳細参照】
Comments

患者の人種をValueSet(Race)より選択する。

  • 2034-7 中国人
  • 2039-6 日本人
  • 2040-4 韓国人
  • 2108-9 ヨーロッパ人
  • 2110-5 英国人
  • 2111-3 フランス人
  • 2112-1 ドイツ人

など

Control0..*
TypeExtension(JP Core Patient Race Extension) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
18. Patient.modifierExtension
Definition

リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short無視できない拡張機能 / Extensions that cannot be ignored
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Patient.identifier
Definition

An identifier for this patient.

この患者の識別子。


この患者の識別子。 / An identifier for this patient.

ShortAn identifier for this patient 【詳細参照】この患者の識別子 / An identifier for this patient
Comments

IDの名前空間を表す Patient.identifier.system と ID値そのものを表す Patient.identifier.value の組み合わせとして表現する。
Patient.identifier.system には、urn:oid:1.2.392.100495.20.3.51.医療機関識別OID番号を使用する。
医療機関識別OID番号は患者IDの発行者である機関の医療機関コード(10桁)の先頭に1をつけた11桁とする。医療機関コード(10桁)の詳細はこちらのリンクを参照すること。

例:医療機関コード「1312345670」の場合「urn:oid:1.2.392.100495.20.3.51.11312345670」

なお、urn:oid:1.2.392.100495.20.3.51の部分は、「処方情報 HL7FHIR 記述仕様」表19 識別子名前空間一覧において医療機関等の患者IDとして割り当てられたOIDのURL型である。地域医療連携ネットワークの地域患者IDを指定する場合も同様に、地域患者IDを識別する名前空間(IHE ITI PIX等で使用されるOID等)をsystemに使用することができる。

NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

ほとんどの場合、患者には特定の数値識別子が割り当てられる。


患者にはほとんどの場合、特定の数値識別子が割り当てられます。 / Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Patient.identifier.use
Definition

この識別子の目的。 / The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known) 【詳細参照】通常|公式|温度|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
IDの種別をValueSet(IdentifierUse)より選択する。

  • usual : 一般
  • official : 公式(マイナンバーなど、最も信頼できると見なされる場合に使用)
  • temp : 一時的
  • secondary : 二次利用
  • old : 過去の識別子

アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Patient.identifier.system
Definition

医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)


値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Short医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)識別子値の名前空間 / The namespace for the identifier value
Comments

Identifier.system is always case sensitive.
Patient.identifier.system には、urn:oid:1.2.392.100495.20.3.51.医療機関識別OID番号を使用する。
医療機関識別OID番号は患者IDの発行者である機関の医療機関コード(10桁)の先頭に1をつけた11桁とする。医療機関コード(10桁)の詳細はこちらのリンクを参照すること。

例:医療機関コード「1312345670」の場合「urn:oid:1.2.392.100495.20.3.51.11312345670」

なお、urn:oid:1.2.392.100495.20.3.51の部分は、「処方情報 HL7FHIR 記述仕様」表19 識別子名前空間一覧において医療機関等の患者IDとして割り当てられたOIDのURL型である。地域医療連携ネットワークの地域患者IDを指定する場合も同様に、地域患者IDを識別する名前空間(IHE ITI PIX等で使用されるOID等)をsystemに使用することができる。


識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.identifier.value
Definition

医療機関での患者番号、または保険者・被保険者番号情報


通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Short医療機関での患者番号、または保険者・被保険者番号情報一意の値 / The value that is unique
Comments

リソースをオン資ネットワークに送信する場合には、保険者・被保険者番号情報は必須。


値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.
この患者記録がアクティブに使用されているかどうか。多くのシステムは、このプロパティを使用して、組織のビジネスルールに基づいて一定期間見られなかった患者など、非現在の患者としてマークする。
非アクティブな患者を除外するために患者リストをフィルタリングするためによく使用される。
死亡した患者は、同じ理由で不活性とマークされる場合があるが、死後しばらくは活性である場合がある。


この患者記録が積極的に使用されているかどうか。 多くのシステムは、このプロパティを使用して、組織のビジネスルールに基づいてしばらく見られなかった患者など、非電流患者としてマークします。

非アクティブな患者を除外するために患者リストをフィルタリングするためによく使用されます

亡くなった患者は、同じ理由で非アクティブとしてマークされる場合もありますが、死後しばらく活動する場合があります。 / Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

Shortこの患者の記録が積極的に使用されているかどうか / Whether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.
この患者の記録が有効かどうか
誤って患者を登録して削除したい場合などにfalseにする


レコードが非アクティブであり、アクティブな記録にリンクされている場合、他の患者に将来の患者/記録の更新が発生するはずです。 / If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid この要素は、レコードの有効・無効判定を示すステータス要素であるため、修飾子としてラベル付けされるこの要素は、レコードを有効として扱うべきではないことを示すことができるステータス要素であるため、修飾子としてラベル付けされています。 / This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.
患者レコードが誤って作成された場合のため、使用されないレコードとしてマークできる必要がある。


誤って作成されたため、使用しないように患者の記録をマークできる必要があります。 / Need to be able to mark a patient record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element アクティブな要素に値が指定されていない場合、このリソースは通常アクティブであると想定される
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Patient.name
Definition

A name associated with the individual.

個人に関連付けられた名前。


個人に関連付けられた名前。 / A name associated with the individual.

Short患者に関連付けられた名前 / A name associated with the patient
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.
患者は、用途や適用期間が異なる複数の名前を持つ場合がある。動物の場合、名前は人間によって割り当てられて使用され、同じパターンを持つという意味で「HumanName」を使用する。
FHIRデータ型仕様に従って、以下の内容を採用する。

  • 姓名分割できる場合は、名前パート HumanName.familyとHumanName.givenに指定する
  • ミドルネームがある場合は、given に指定する(givenは繰り返し可能)
  • 姓名に分割できない場合は、HumanName.text にフルネームを指定する
  • 各名前パートとtext は、両方存在してもよい
  • 漢字氏名、カナ氏名の区別は、iso21090-EN-representation を使用する

患者は、使用期間が異なる複数の名前を持つ場合があります。動物の場合、名前は人間によって割り当てられ使用され、同じパターンを持っているという意味での「ハマネーム」です。 / A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control10..*
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。


複数の名前で患者を追跡できる必要があります。例は、あなたの正式名とパートナー名です。 / Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension($iso21090-EN-representation).value
32. Patient.name.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..01
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
34. Patient.name.extension
Definition

An Extension


要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtension実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
36. Patient.name.extension.url
Definition

拡張コードの定義のソース - 論理名またはURL。 / Source of the definition for the extension code - a logical name or a URL.

Short拡張機能の意味を識別します / identifies the meaning of the extension
Comments

定義は、拡張性コードの計算可能または人間が読み取る可能性のある定義を直接指している場合があります。または、他の仕様で宣言されているように、論理的なURIである場合があります。定義は、拡張機能を定義する構造定義のURIでなければなりません。 / The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
38. Patient.name.extension.value[x]
Definition

拡張値の値 - データ型の制約付きセットの1つでなければなりません(リストの[拡張性](拡張性](拡張性。html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control0..1
Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
40. Patient.name.extension.value[x]:valueCode
Slice NamevalueCode
Definition

拡張値の値 - データ型の制約付きセットの1つでなければなりません(リストの[拡張性](拡張性](拡張性。html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control0..1
Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Patient.name.extension:nameRepresentationUse
Slice NamenameRepresentationUse
Definition

Name Representation.

名前の表現方法

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

The transcription of the name - how it is represented (for e.g. Japanese names).

名前の文字起こし-表現方法(日本の名前など)。

Control0..1
TypeExtension(EN-representation) (Extension Type: code)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
44. Patient.name.use
Definition

Identifies the purpose for this name.

この名前の使用目的


この名前の目的を特定します。 / Identifies the purpose for this name.

Short通常|公式|温度|ニックネーム|匿名|古い|乙女 / usual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

アプリケーションは、名前が明示的に一時的な名前(temp )あるいは以前の名前だ(old )と設定されていない場合には、現時点での名前だとみなしてよい。


アプリケーションは、一時的または古いものであると明示的に言わない限り、名前が最新であると想定できます。 / Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い名前などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

一連の名前の中から、特定の使用状況に適した名前を選択できるようになる。


特定の使用のコンテキストに適切な名前を許可します。名前のセットの中から選択できます。 / Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Patient.name.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

アプリケーションUIなどで、表示する名前全体を指定する。名前の特定の部分の代わり、または特定の部分と同じとして使われることがある。姓と名をこの順番で半角空白1文字を区切り文字として格納する


表示する必要があるため、名前全体を指定します。アプリケーションUIで。これは、特定の部分の代わりに、または特定の部分と同様に提供される場合があります。 / Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name 名前全体のテキスト表現。姓と名をこの順番で半角空白1文字を区切り文字として格納するフルネームのテキスト表現 / Text representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

テキスト要素の表現とその部分構成要素の両方を提供できる。名前を更新するアプリケーションは、テキストと部分構成要素の両方が存在する場合、部分構成要素にないコンテンツがテキスト要素に含まれないようにする必要がある。姓と名をこの順番で半角空白1文字を区切り文字として格納する


テキスト表現とパーツの両方を提供できます。名前を更新するアプリケーションは、テキストとパーツの両方が存在する場合、一部に見つからないテキストにコンテンツが含まれていないことを保証するものとします。 / Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Patient.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

家系図にリンクする名前の部分。一部の文化では、息子の家系の名前は父親の名である。


系図にリンクする名前の部分。一部の文化(例:エリトリア)では、息子の姓は父親の名です。 / The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname') 名前のうち姓の部分。ファミリ名姓(「姓」と呼ばれることが多い) / Family name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

ファミリ名は、拡張子(de、nl、es関連のカルチャ)を使用して特定の部分に分解できる。


姓は、拡張機能(DE、NL、ES関連の培養)を使用して特定の部品に分解できます。 / Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Patient.name.given
Definition

Given name.

名前の名の部分。


名。 / Given name.

ShortGiven names (not always 'first'). Includes middle names 名前の名の部分で、ミドルネームを含む指定された名前(常に「最初」ではありません)。ミドルネームが含まれています / Given names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to practical limitations. This element is not called "first name" since given names do not always come first.

イニシャルのみが記録されている場合は、フルネームの部分の代わりに使用できる。イニシャルは複数の名前に分けることができるが、多くの場合、実用的な制限のためではない。名が常に最初に来るとは限らないため、この要素は「first name」とは呼ばない。


イニシャルのみが記録されている場合、フルネームパーツの代わりに使用できます。イニシャルは複数の指定された名前に分離される場合がありますが、多くの場合、特定の制限によるものではありません。指定された名前が常に最初に来るとは限らないため、この要素は「名」とは呼ばれません。 / If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control10..1*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Patient.name.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の先頭に表示される名前の一部。


アカデミック、リーガル、雇用、または貴族のステータスなどのためにタイトルとして取得され、名前の冒頭に表示される名前の一部。 / Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name 名前の名の前に来る部分名前の前に来るパーツ / Parts that come before the name
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Patient.name.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の最後に表示される名前の一部。


アカデミック、リーガル、雇用、または貴族のステータスなどのためにタイトルとして取得され、名前の最後に表示される名前の一部。 / Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name 名前の名のあとに続く部分名前の後に来るパーツ / Parts that come after the name
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Patient.name.period
Definition

Indicates the period of time when this name was valid for the named person.

この名前が指名された人に対して有効であった期間。


この名前が指定者に対して有効である期間を示します。 / Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use 名前が使われる期間名前が使用されていた期間 / Time period when name was/is in use
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Period(期間)は時間の範囲を指定する。使用状況は、範囲全体が適用されるか(たとえば、「患者はこの時間範囲で入院していた」)、範囲から1つの値が適用されるか(たとえば、「この2回の間に患者に投与する」)を指定する。 Period(期間)は、Duration(時間区間=経過時間の測定値)には使用されない。 [Duration](datatypes.html#Duration)を参照のこと。

Control0..01
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

名前を歴史的な文脈に配置できます。 / Allows names to be placed in historical context.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.name:kanji
Slice Namekanji
Definition

漢字の名前情報


個人に関連付けられた名前。 / A name associated with the individual.

Short漢字の名前情報患者に関連付けられた名前 / A name associated with the patient
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

名前が変更されたり、違っていると指摘されたり、コンテキストによって使われる名前が異なる場合がある。名前は、コンテキストに応じて重要性が異なるさまざまなタイプの部分に分割される場合があり、部分への分割は必ずしも重要ではない。個人名の場合、さまざまな部分に暗黙の意味が含まれている場合と含まれていない場合がある。さまざまな文化が名前の部分にさまざまな重要性を関連付けており、システムが世界中の名前の部分を気にする必要がある程度は大きく異なる。


患者は、使用期間が異なる複数の名前を持つ場合があります。動物の場合、名前は人間によって割り当てられ使用され、同じパターンを持っているという意味での「ハマネーム」です。 / A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control10..1*
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。


複数の名前で患者を追跡できる必要があります。例は、あなたの正式名とパートナー名です。 / Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Patient.name:kanji.extension:nameRepresentationUse
Slice NamenameRepresentationUse
Definition

名前表現。 / Name Representation.

ShortABC |IDE |Syl / ABC | IDE | SYL
Comments

名前の転写 - それがどのように表されるか(例:日本語)。 / The transcription of the name - how it is represented (for e.g. Japanese names).

Control0..1
TypeExtension(EN-representation) (Extension Type: code)
Is Modifierfalse
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
62. Patient.name:kanji.extension:nameRepresentationUse.extension
Definition

拡張 / An Extension


要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short拡大 / Extension実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
64. Patient.name:kanji.extension:nameRepresentationUse.url
Definition

拡張コードの定義のソース - 論理名またはURL。 / Source of the definition for the extension code - a logical name or a URL.

Short拡張機能の意味を識別します / identifies the meaning of the extension
Comments

定義は、拡張性コードの計算可能または人間が読み取る可能性のある定義を直接指している場合があります。または、他の仕様で宣言されているように、論理的なURIである場合があります。定義は、拡張機能を定義する構造定義のURIでなければなりません。 / The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/iso21090-EN-representation
66. Patient.name:kanji.extension:nameRepresentationUse.value[x]
Definition

拡張値の値 - リストのデータ型の制約付きセットの1つである必要があります([拡張性](http://hl7.org/fhir/extensibility.html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


拡張値の値 - データ型の制約付きセットの1つでなければなりません(リストの[拡張性](拡張性](拡張性。html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control10..1
BindingThe codes SHALL be taken from For codes, see NameRepresentationUse
(required to http://hl7.org/fhir/ValueSet/name-v3-representation|4.0.1
Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed ValueIDE
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.name:kanji.use
Definition

Identifies the purpose for this name.

この名前の使用目的


この名前の目的を特定します。 / Identifies the purpose for this name.

Short通常|公式|温度|ニックネーム|匿名|古い|乙女 / usual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

アプリケーションは、名前が明示的に一時的な名前(temp )あるいは以前の名前だ(old )と設定されていない場合には、現時点での名前だとみなしてよい。


アプリケーションは、一時的または古いものであると明示的に言わない限り、名前が最新であると想定できます。 / Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い名前などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

一連の名前の中から、特定の使用状況に適した名前を選択できるようになる。


特定の使用のコンテキストに適切な名前を許可します。名前のセットの中から選択できます。 / Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Patient.name:kanji.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

アプリケーションUIなどで、表示する名前全体を指定する。名前の特定の部分の代わり、または特定の部分と同じとして使われることがある。姓と名をこの順番で半角空白1文字を区切り文字として格納する


表示する必要があるため、名前全体を指定します。アプリケーションUIで。これは、特定の部分の代わりに、または特定の部分と同様に提供される場合があります。 / Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name 名前全体のテキスト表現。姓と名をこの順番で半角空白1文字を区切り文字として格納するフルネームのテキスト表現 / Text representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

テキスト要素の表現とその部分構成要素の両方を提供できる。名前を更新するアプリケーションは、テキストと部分構成要素の両方が存在する場合、部分構成要素にないコンテンツがテキスト要素に含まれないようにする必要がある。姓と名をこの順番で半角空白1文字を区切り文字として格納する


テキスト表現とパーツの両方を提供できます。名前を更新するアプリケーションは、テキストとパーツの両方が存在する場合、一部に見つからないテキストにコンテンツが含まれていないことを保証するものとします。 / Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Patient.name:kanji.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

家系図にリンクする名前の部分。一部の文化では、息子の家系の名前は父親の名である。


系図にリンクする名前の部分。一部の文化(例:エリトリア)では、息子の姓は父親の名です。 / The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname') 名前のうち姓の部分。ファミリ名姓(「姓」と呼ばれることが多い) / Family name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

ファミリ名は、拡張子(de、nl、es関連のカルチャ)を使用して特定の部分に分解できる。


姓は、拡張機能(DE、NL、ES関連の培養)を使用して特定の部品に分解できます。 / Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Patient.name:kanji.given
Definition

Given name.

名前の名の部分。


名。 / Given name.

ShortGiven names (not always 'first'). Includes middle names 名前の名の部分で、ミドルネームを含む指定された名前(常に「最初」ではありません)。ミドルネームが含まれています / Given names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to practical limitations. This element is not called "first name" since given names do not always come first.

イニシャルのみが記録されている場合は、フルネームの部分の代わりに使用できる。イニシャルは複数の名前に分けることができるが、多くの場合、実用的な制限のためではない。名が常に最初に来るとは限らないため、この要素は「first name」とは呼ばない。


イニシャルのみが記録されている場合、フルネームパーツの代わりに使用できます。イニシャルは複数の指定された名前に分離される場合がありますが、多くの場合、特定の制限によるものではありません。指定された名前が常に最初に来るとは限らないため、この要素は「名」とは呼ばれません。 / If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control10..1*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Patient.name:kanji.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の先頭に表示される名前の一部。


アカデミック、リーガル、雇用、または貴族のステータスなどのためにタイトルとして取得され、名前の冒頭に表示される名前の一部。 / Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name 名前の名の前に来る部分名前の前に来るパーツ / Parts that come before the name
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Patient.name:kanji.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の最後に表示される名前の一部。


アカデミック、リーガル、雇用、または貴族のステータスなどのためにタイトルとして取得され、名前の最後に表示される名前の一部。 / Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name 名前の名のあとに続く部分名前の後に来るパーツ / Parts that come after the name
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Patient.name:kanji.period
Definition

Indicates the period of time when this name was valid for the named person.

この名前が指名された人に対して有効であった期間。


この名前が指定者に対して有効である期間を示します。 / Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use 名前が使われる期間名前が使用されていた期間 / Time period when name was/is in use
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Period(期間)は時間の範囲を指定する。使用状況は、範囲全体が適用されるか(たとえば、「患者はこの時間範囲で入院していた」)、範囲から1つの値が適用されるか(たとえば、「この2回の間に患者に投与する」)を指定する。 Period(期間)は、Duration(時間区間=経過時間の測定値)には使用されない。 [Duration](datatypes.html#Duration)を参照のこと。

Control0..01
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

名前を歴史的な文脈に配置できます。 / Allows names to be placed in historical context.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Patient.name:kana
Slice Namekana
Definition

カタカナの名前情報


個人に関連付けられた名前。 / A name associated with the individual.

Shortカタカナの名前情報患者に関連付けられた名前 / A name associated with the patient
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

名前が変更されたり、違っていると指摘されたり、コンテキストによって使われる名前が異なる場合がある。名前は、コンテキストに応じて重要性が異なるさまざまなタイプの部分に分割される場合があり、部分への分割は必ずしも重要ではない。個人名の場合、さまざまな部分に暗黙の意味が含まれている場合と含まれていない場合がある。さまざまな文化が名前の部分にさまざまな重要性を関連付けており、システムが世界中の名前の部分を気にする必要がある程度は大きく異なる。


患者は、使用期間が異なる複数の名前を持つ場合があります。動物の場合、名前は人間によって割り当てられ使用され、同じパターンを持っているという意味での「ハマネーム」です。 / A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control0..1*
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。


複数の名前で患者を追跡できる必要があります。例は、あなたの正式名とパートナー名です。 / Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Patient.gender
Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes. 管理上の性別-患者が管理および記録管理の目的で持つと見なされる性別。


管理性別 - 患者が投与および記録保持目的で持っていると見なされる性別。 / Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Short男性|女性|その他|わからない / male | female | other | unknown
Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

患者の性別をValueSet(AdministrativeGender)より選択する。 male 男性 female 女性 other その他 unknown 不明


性別は、遺伝学または個人の好みの識別によって決定されるように、生物学的性別と一致しない可能性があります。人間と特に動物の両方について、男性と女性よりも他の正当な可能性があるが、システムとコンテキストの大部分は男性と女性のみをサポートすることに注意してください。意思決定支援またはビジネスルールを提供するシステムは、これらの観察結果がまれに記録されており、管理者にデフォルトであるため、関心のある特定の性別または性別の側面(解剖学的、染色体、社会など)を扱う観察に基づいて、理想的にはこれを行う必要があります。性別は一般的な慣行です。そのようなデフォルトが発生した場合、ルールの施行は、管理と生物学、染色体、その他の性別の側面の変動を可能にする必要があります。たとえば、男性の子宮摘出術についての警告は、「ハード」エラーではなく、警告または過剰なエラーとして処理する必要があります。患者の性別と性別の伝達に関する追加情報については、患者の性別と性別セクションを参照してください。 / The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Control10..1
BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

(少なくとも)名前と生年月日と組み合わせて、個人の識別に必要です。 / Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Patient.birthDate
Definition

The date of birth for the individual. 個人の生年月日


個人の生年月日。 / The date of birth for the individual.

ShortThe date of birth for the individual 個人の生年月日個人の生年月日 / The date of birth for the individual
Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).
実際の生年月日が不明な場合は、少なくとも推定年を推測として提供する必要があり、時間が必要な場合(出産/乳児ケアシステムなど)に使用できる標準の拡張extension「patient-birthTime」がある。
患者の生年月日をYYYY-MM-DD形式で入れる。
例:1945-08-23


少なくとも推定年は、実際のDOBが不明な場合は、時間が必要な場所(産科/乳児ケアシステムなど)が必要な場所で使用する必要がある標準的な拡張「患者誕生時間」がある場合、推定年を推測する必要があります。 / At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Control10..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

個人の年齢は、多くの臨床プロセスを推進します。 / Age of the individual drives many clinical processes.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
LOINC Code21112-8
88. Patient.deceased[x]
Definition

Indicates if the individual is deceased or not. 個人が死亡しているかどうかを示す。


個人が亡くなったかどうかを示します。 / Indicates if the individual is deceased or not.

ShortIndicates if the individual is deceased or not 個人が死亡しているかどうかを示す個人が亡くなったかどうかを示します / Indicates if the individual is deceased or not
Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.
値がない場合は、個人が死亡したかどうかについてのステートメントがないことを意味し、ほとんどのシステムは、値がないことを人が生きていることの兆候として解釈する。
患者が死亡しているかどうかを示す
deceasedBooleanまたはdeceasedDateTimeのどちらかに値が入る

  • deceasedBoolean : true(死亡) / false(生存)
  • deceasedDateTime : 患者の死亡日時

インスタンスに価値がない場合、個人が亡くなったかどうかについての声明がないことを意味します。ほとんどのシステムは、価値の欠如を生きている人の兆候として解釈します。 / If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifiertrue because この要素は、患者が故人としてマークされると、患者で実行するのに適した行動が著しく異なる可能性があるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

患者が亡くなったという事実は、臨床プロセスに影響を与えます。また、人間のコミュニケーションと関係管理において、その人が生きているかどうかを知る必要があります。 / The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Patient.address
Definition

An address for the individual. 患者の住所。必須。


個人のアドレス。 / An address for the individual.

ShortAn address for the individual 個人の住所 【詳細参照】個人のアドレス / An address for the individual
Comments

Patient may have multiple addresses with different uses or applicable periods. 患者は、異なる用途または適用可能な期間で複数の住所を持っている可能性がある。

【JP Core仕様】FHIRデータ型仕様に従って、以下の案とした。

  • 住所が構造化されている場合、住所パート Address.country、Address.postalcode、Address.state、Address.city、Address.line に分割して記載する
  • 住所が構造化されていない場合は、Address.text に記述する
  • 各住所パートとtext は、両方存在してもよい

※診療文書構造化記述規約等では、streetAddressLine (FHIRではlineに対応) に指定するとなっていた。


患者には、さまざまな用途または該当する期間の複数の住所があります。 / Patient may have multiple addresses with different uses or applicable periods.

Control0..1*
TypeAddress
Is Modifierfalse
Summarytrue
Requirements

連絡、請求、報告の要件のために患者の住所を追跡し、識別を支援する必要がある場合があります。 / May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.address.use
Definition

The purpose of this address. 住所の用途


このアドレスの目的。 / The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address 住所の用途 【詳細参照】ホーム|作業|温度|古い|請求 - この住所の目的 / home | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

住所の用途をValueSet(AddressUse)より選択する。

  • home : 自宅
  • work : 職場
  • temp : 一時的
  • old : 以前の
  • billing : 請求書、インボイス、領収書などの送付用

アプリケーションは、一時的または古いものであると明示的に言わない限り、住所が最新であると想定できます。 / Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/address-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い住所などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

多くのリストから適切なアドレスを選択できるようにします。 / Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.address.text
Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.
表示するアドレス全体を指定する
例:郵便ラベル。これは、特定の部品の代わりに、または特定の部品と同様に提供される場合がある。


アドレス全体を指定する必要があるため、例えば郵便ラベルで。これは、特定の部分の代わりに、または特定の部分と同様に提供される場合があります。 / Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

ShortText representation of the address 住所のテキスト表現 【詳細参照】アドレスのテキスト表現 / Text representation of the address
Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.
テキスト表現とパーツの両方を提供できる。アドレスを更新するアプリケーションは、テキストとパーツの両方が存在する場合、パーツにないコンテンツはテキストに含まれないようにする必要がある。

  • 住所を(都道府県や市町村などに)分離して管理していない場合は、textに入れる。
  • 住所を(都道府県や市町村などに)分離して管理している場合でも、まとめてtextに入れること。
  • 郵便番号は含めない。

例:東京都文京区本郷7-3-1


テキスト表現とパーツの両方を提供できます。アドレスを更新するアプリケーションは、テキストとパーツの両方が存在する場合、一部に見つからないテキストにコンテンツが含まれていないことを保証するものとします。 / Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Patient.address.postalCode
Definition

郵便サービスによって定義された地域を指定する郵便番号。 / A postal code designating a region defined by the postal service.

ShortPostal code for area 【詳細参照】エリアの郵便番号 / Postal code for area
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size 1MBを超えないこと。
郵便番号。日本の郵便番号の場合には3桁数字とハイフン1文字と4桁数字からなる半角8文字、または最初の3桁だけの3文字のいずれかとする。 例:113-8655

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesZip
Example<br/><b>General</b>:9132
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Patient.address.country
Definition

Country - a nation as commonly understood or generally accepted. 国-一般的に理解されている、または一般的に受け入れられている国の国名かコード。


国 - 一般的に理解されるか、一般的に受け入れられている国。 / Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)国名またはISO 3166コード国(例えばISO 3166 2または3文字のコードにすることができます) / Country (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.
ISO 3166 3文字コードは、人間が読める国名の代わりに使用する。
ISO 3166の2文字または3文字のコード
日本であれば、jpまたはjpn


ISO 3166 3文字コードは、人間の読み取り可能な国名の代わりに使用できます。 / ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.link
Definition

Link to another patient resource that concerns the same actual patient.

事実上の同一患者をリンクする別のPatientリソース。


同じ実際の患者に関係する別の患者リソースへのリンク。 / Link to another patient resource that concerns the same actual patient.

ShortLink to another patient resource that concerns the same actual person 事実上の同一患者をリンクする別のPatientリソース同じ実際の人に関係する別の患者リソースへのリンク / Link to another patient resource that concerns the same actual person
Comments

There is no assumption that linked patient records have mutual links.

リンクされた患者記録に相互リンクがあるという仮定はない。


リンクされた患者記録に相互リンクがあるという仮定はありません。 / There is no assumption that linked patient records have mutual links.

Control0..*
TypeBackboneElement
Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by' この要素は、メインのPatientリソースではない可能性があるため、修飾子としてラベル付けされ、このPatientレコードの代わりに参照された患者を使用する必要がある。link.type値が 'replaced-by'の場合この要素は、主要な患者リソースではない可能性があり、参照される患者をこの患者記録の代わりに使用する必要があるため、修飾子としてラベル付けされています。これは、link.type値が「置き換えられた」時です / This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
Summarytrue
Requirements

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers

複数のユースケースがある。

  • 事務的なエラーのため一貫して人間を特定することが困難であり患者の記録が重複している
  • 複数のサーバにわたり患者情報が配布されている

複数のユースケースがあります:

*人間を一貫して識別することの難しさに関連する事務誤りのために患者の記録を重複させ、 *複数のサーバーにわたる患者情報の配布。 / There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers.
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Patient.link.modifierExtension
Definition

要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
104. Patient.link.other
Definition

The other patient resource that the link refers to.

リンクが参照する他の患者リソース。


リンクが指す他の患者リソース。 / The other patient resource that the link refers to.

Shortリンクが指す他の患者または関連者のリソース / The other patient or related person resource that the link refers to
Comments

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

ここでRelatedPersonを参照すると、Personレコードを使用して患者とRelatedPersonを同じ個人として関連付ける必要がなくなる。


ここで関連者を参照することで、個人の記録を使用して患者と関連者を同じ個人として関連付ける必要性が削除されます。 / Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Control1..1
TypeReference(JP Core Patient Profile, RelatedPerson, Patient)
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Patient.link.type
Definition

The type of link between this patient resource and another patient resource.

この患者リソースと別の患者リソース間のリンクのタイプ。


この患者リソースと別の患者リソースとの間のリンクのタイプ。 / The type of link between this patient resource and another patient resource.

Shortreplaced-by | replaces | refer | seealso 【詳細参照】交換|交換|参照|seealso / replaced-by | replaces | refer | seealso
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size
この患者リソースと別の患者リソース間のリンクのタイプをValueSet(LinkType)より選択する。

  • replaced-by : このリンクを含む患者リソースは使用しないこと
  • replaces : このリンクを含む患者リソースは、現在アクティブな患者レコードである
  • refer : このリンクを含む患者リソースは使用中であり、有効であるが、患者に関する主な情報源とは見なされていない
  • seealso : このリンクを含む患者リソースは使用中で有効であるが、同じ人物に関するデータが含まれていることがわかっている別の患者リソースを指す
Control1..1
BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/link-type|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

診療情報コアサマリー・厚労省6情報などにおける患者情報の格納に使用する

Short診療情報コアサマリーにおける患者情報の格納に使用する
Comments

他のリソースに埋め込まれる(contained要素)患者情報のためには、別のプロファイルが用意されている。

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
2. Patient.id
Definition

リソースのURLで使用されるリソースの論理ID。割り当てられたら、この値は変更されません。 / The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Shortこのアーティファクトの論理ID / Logical id of this artifact
Comments

リソースにIDがないのは、IDが作成操作を使用してサーバーに送信されている場合です。 / The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Patient.meta
Definition

リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Shortリソースに関するメタデータ / Metadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Patient.meta.id
Definition

リソース内の要素の固有ID(内部参照用)。これは、スペースを含まない任意の文字列値である可能性があります。

Shortエレメント相互参照のためのユニークID
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
8. Patient.meta.extension
Definition

「要素の基本的な定義に含まれない追加情報を表すために使用されることがあります。拡張機能の使用を安全かつ管理しやすくするために、定義および使用に適用される厳格なガバナンスのセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たす必要のある要件のセットがあります。」

Short実装によって定義される追加コンテンツ
Comments

どのようなアプリケーション、プロジェクト、または標準が拡張機能を使用しているかに関わらず、拡張機能の使用には決して汚名が付くわけではありません - それらを使用または定義する機関または管轄区域に関係なく。拡張機能の使用こそが、FHIR仕様を誰にとっても簡単なコアレベルで維持することを可能にします。

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
ext-1: 「拡張機能または値[x]のいずれかが必要です。両方ではありません。」 (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. Patient.meta.versionId
Definition

URLのバージョン部分に表示されるバージョン固有の識別子。この値は、リソースが作成、更新、または削除された場合に変更されます。

Shortバージョン固有の識別子 (Baajon koyū no shikibetsu-shi)
Comments

サーバーがこの値を割り当て、クライアントが指定した値を無視する。ただし、サーバーが更新/削除時にバージョンの整合性を強制する場合を除く。

Control0..1
Typeid
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
12. Patient.meta.lastUpdated
Definition

この患者情報の内容がサーバ上で最後に格納または更新された日時、またはこのFHIRリソースが生成された日時

Short最終更新日
Comments

この値はリソースが初めて作成される場合を除いて常に設定されています。サーバー/リソースマネージャーがこの値を設定します。クライアントが提供する値は関係ありません。これはHTTP Last-Modifiedに相当し、readのインタラクションで同じ値を持つべきです。

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
14. Patient.meta.source
Definition

リソースのソースシステムを識別するURI。これにより、リソース内の情報のソースをトラックまたは区別するために使用できる最小限の[プロビナンス](provenance.html#)情報が提供されます。ソースは、別のFHIRサーバー、ドキュメント、メッセージ、データベースなどを識別できます。

Short「リソースがどこから来たかを特定する」(Risōsu ga doko kara kita ka o tokutei suru)
Comments

「プロバナンスのリソースにおいて、これはProvenance.entity.what[x]に対応します。ソースの正確な使用方法(および含意されるProvenance.entity.role)は実装者の判断に委ねられます。指定されたソースは1つだけです。追加のプロバナンスの詳細が必要な場合は、完全なプロバナンスリソースを使用するべきです。

この要素は、正規のURLでホストされていないリソースの現在のマスターソースがどこにあるかを示すために使用できます。」

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
16. Patient.meta.profile
Definition

このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

Shortこのリソースが適合を主張するプロファイル
Comments

これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

Control1..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuehttp://jpfhir.jp/fhir/eCS/StructureDefinition/JP_Patient_eCS
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
18. Patient.meta.security
Definition

このリソースにはセキュリティラベルが適用されています。これらのタグにより、特定のリソースが全体的なセキュリティポリシーやインフラストラクチャに関連付けられます。

Shortこのリソースに適用されたセキュリティラベル
Comments

セキュリティラベルは変更せずにリソースのバージョンを更新可能です。セキュリティラベルのリストはセットであり、一意性はシステム/コードに基づき、バージョンと表示は無視されます。

Control0..*
BindingUnless not suitable, these codes SHALL be taken from All Security Labels
(extensible to http://hl7.org/fhir/ValueSet/security-labels
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
20. Patient.meta.tag
Definition

このリソースに適用されるタグです。タグは、リソースをプロセスやワークフローに識別し、関連付けるために使用することが意図されており、アプリケーションはリソースの意味を解釈する際にタグを考慮する必要はありません。

Shortこのリソースに適用されたタグ
Comments

リソースの表示バージョンを変更することなく、タグを更新できます。タグのリストは集合です。ユニーク性はシステム/コードに基づき、バージョンと表示は無視されます。

Control0..*
BindingFor example codes, see CommonTags
(example to http://hl7.org/fhir/ValueSet/common-tags
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
22. Patient.implicitRules
Definition

リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
Comments

このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Patient.language
Definition

リソースが書かれている基本言語。 / The base language in which the resource is written.

Shortリソースコンテンツの言語 / Language of the resource content
Comments

言語は、インデックス作成とアクセシビリティをサポートするために提供されます(通常、テキストから音声までのサービスなどのサービスが言語タグを使用します)。叙述(Narative)のHTML言語タグは、叙述(Narative)に適用されます。リソース上の言語タグを使用して、リソース内のデータから生成された他のプレゼンテーションの言語を指定できます。すべてのコンテンツが基本言語である必要はありません。リソース。言語は、叙述(Narative)に自動的に適用されると想定されるべきではありません。言語が指定されている場合、HTMLのDIV要素にも指定されている場合(XML:LangとHTML Lang属性の関係については、HTML5のルールを参照してください)。 / Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.text
Definition

リソースの概要を含み、人間へのリソースの内容を表すために使用できる人間の読み取り可能な叙述(Narative)。叙述(Narative)はすべての構造化されたデータをエンコードする必要はありませんが、人間が叙述(Narative)を読むだけで「臨床的に安全」にするために十分な詳細を含める必要があります。リソースの定義は、臨床的安全を確保するために、叙述(Narative)で表現するコンテンツを定義する場合があります。 / A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short人間の解釈のためのリソースのテキスト概要 / Text summary of the resource, for human interpretation
Comments

含まれるリソースには叙述(Narative)がありません。含まれていないリソースには叙述(Narative)が必要です。場合によっては、リソースには、追加の個別のデータがほとんどまたはまったくないテキストのみがあります(すべてのMinoccur = 1要素が満たされている限り)。これは、情報がtext blob (バイナリー ラージ オブジェクト)としてキャプチャされるレガシーシステムからのデータ、またはテキストが生またはナレーションされ、エンコードされた情報が後で追加される場合に必要になる場合があります。 / Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Patient.contained
Definition

これらのリソースには、それらを含むリソースを除いて独立した存在はありません - 独立して特定することはできず、独自の独立したトランザクションスコープを持つこともできません。 / These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Shortインラインリソースが含まれています / Contained, inline Resources
Comments

識別が失われると、コンテンツを適切に識別できる場合は、これを行うべきではありません。含まれるリソースには、メタ要素にプロファイルとタグがある場合がありますが、セキュリティラベルはありません。 / This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
30. Patient.extension
Definition

リソースの基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Patient.extension:religion
Slice Namereligion
Definition

The patient's professed religious affiliations. 患者の公言された宗教的所属。

Short患者の宗教 【詳細参照】
Comments

患者の宗教をValueSet(v3.ReligiousAffiliation)より選択する。輸血や食事で考慮が必要な場合がある。

  • 1013 キリスト教
  • 1020 ヒンドゥー教
  • 1023 イスラム教

など

Control0..*
TypeExtension(religion) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Patient.extension:birthPlace
Slice NamebirthPlace
Definition

The registered place of birth of the patient. A system may use the address.text if they don't store the birthPlace address in discrete elements. 患者の登録された出生地。システムは、birthPlaceアドレスを個別の要素に格納しない場合、address.textを使用してよい。

Short患者の生誕地 【詳細参照】
Comments

患者の生誕地をAddress型で表現する

Control0..1
TypeExtension(Birth Place) (Extension Type: Address)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. Patient.extension:race
Slice Namerace
Definition

Optional Extension Element - found in all resources. オプションの拡張要素-すべてのリソースで使用できる。

Short患者の人種 【詳細参照】
Comments

患者の人種をValueSet(Race)より選択する。

  • 2034-7 中国人
  • 2039-6 日本人
  • 2040-4 韓国人
  • 2108-9 ヨーロッパ人
  • 2110-5 英国人
  • 2111-3 フランス人
  • 2112-1 ドイツ人

など

Control0..*
TypeExtension(JP Core Patient Race Extension) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Patient.modifierExtension
Definition

リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short無視できない拡張機能 / Extensions that cannot be ignored
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Patient.identifier
Definition

An identifier for this patient.

この患者の識別子。

ShortAn identifier for this patient 【詳細参照】
Comments

IDの名前空間を表す Patient.identifier.system と ID値そのものを表す Patient.identifier.value の組み合わせとして表現する。
Patient.identifier.system には、urn:oid:1.2.392.100495.20.3.51.医療機関識別OID番号を使用する。
医療機関識別OID番号は患者IDの発行者である機関の医療機関コード(10桁)の先頭に1をつけた11桁とする。医療機関コード(10桁)の詳細はこちらのリンクを参照すること。

例:医療機関コード「1312345670」の場合「urn:oid:1.2.392.100495.20.3.51.11312345670」

なお、urn:oid:1.2.392.100495.20.3.51の部分は、「処方情報 HL7FHIR 記述仕様」表19 識別子名前空間一覧において医療機関等の患者IDとして割り当てられたOIDのURL型である。地域医療連携ネットワークの地域患者IDを指定する場合も同様に、地域患者IDを識別する名前空間(IHE ITI PIX等で使用されるOID等)をsystemに使用することができる。

NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

ほとんどの場合、患者には特定の数値識別子が割り当てられる。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Patient.identifier.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. Patient.identifier.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
46. Patient.identifier.use
Definition

この識別子の目的。 / The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known) 【詳細参照】
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
IDの種別をValueSet(IdentifierUse)より選択する。

  • usual : 一般
  • official : 公式(マイナンバーなど、最も信頼できると見なされる場合に使用)
  • temp : 一時的
  • secondary : 二次利用
  • old : 過去の識別子
Control0..1
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Patient.identifier.type
Definition

特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier 【詳細参照】
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
IDの種別をValueSet(Identifier Type Codes)より選択する。

  • DL : 運転免許証番号
  • PPN : パスポート番号
  • BRN : 血統登録番号
  • MR : カルテ番号

など

Control0..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

識別子システムが不明な場合、ユーザーは識別子を使用できます。 / Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Patient.identifier.system
Definition

医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)

Short医療機関患者番号のためのsystem値(url)、または険者・被保険者番号情報のためのsystem値(url)
Comments

Identifier.system is always case sensitive.
Patient.identifier.system には、urn:oid:1.2.392.100495.20.3.51.医療機関識別OID番号を使用する。
医療機関識別OID番号は患者IDの発行者である機関の医療機関コード(10桁)の先頭に1をつけた11桁とする。医療機関コード(10桁)の詳細はこちらのリンクを参照すること。

例:医療機関コード「1312345670」の場合「urn:oid:1.2.392.100495.20.3.51.11312345670」

なお、urn:oid:1.2.392.100495.20.3.51の部分は、「処方情報 HL7FHIR 記述仕様」表19 識別子名前空間一覧において医療機関等の患者IDとして割り当てられたOIDのURL型である。地域医療連携ネットワークの地域患者IDを指定する場合も同様に、地域患者IDを識別する名前空間(IHE ITI PIX等で使用されるOID等)をsystemに使用することができる。

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Patient.identifier.value
Definition

医療機関での患者番号、または保険者・被保険者番号情報

Short医療機関での患者番号、または保険者・被保険者番号情報
Comments

リソースをオン資ネットワークに送信する場合には、保険者・被保険者番号情報は必須。

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Patient.identifier.period
Definition

識別子が使用される/有効な期間。 / Time period during which identifier is/was valid for use.

ShortIDが使用に有効だった時間期間 / Time period when id is/was valid for use
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").
Period is not used for a duration (a measure of elapsed time). See Duration.

IDが使われていた/使われている期間。

Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Patient.identifier.assigner
Definition

識別子を発行/管理する組織。 / Organization that issued/manages the identifier.

ShortIDを発行した組織(単なるテキストである可能性があります) / Organization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

IDを発行した組織(テキストのみでも可)

Control0..1
TypeReference(JP Core Organization Profile)
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.identifier.assigner.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
60. Patient.identifier.assigner.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.identifier.assigner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
62. Patient.identifier.assigner.reference
Definition

患者番号を付番した医療機関情報(Organization)への参照

Short患者番号を付番した医療機関情報(Organization)への参照
Comments

絶対URLを使用すると、クラウド/Webコンテキストに適した安定したスケーラブルなアプローチが提供されますが、相対的/論理的な参照を使用すると、閉じたエコシステムの境界を横切る際に使用するのに適した柔軟なアプローチが提供されます。絶対URLは、FHIR Restfulサーバーを指す必要はありませんが、これは好ましいアプローチです。URLが構造 "/[type]/[id]"に適合している場合、参照がFHIR Restfulサーバーへの参照であると想定する必要があります。 / Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control0..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Patient.identifier.assigner.type
Definition

参照のターゲットの予想タイプ。reference.typeとreference.Referenceが入力され、参照.ReferenceがFHIR URLである場合、どちらも一貫しているものとします。

このタイプは、このリファレンスが指すタイプであるリソース定義の標準URLです。参照は、http://hl7.org/fhir/structuredefinition/に関連するURLです。「患者」はhttp://hl7.org/fhir/structuredefinition/patientへの参照です。絶対URLは、論理モデルでのみ許可されます(リソースではなく論理モデルの参照でのみ使用できます)。 / The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

Short入力リファレンスを指す(例:「患者」) / Type the reference refers to (e.g. "Patient")
Comments

この要素は、参照のターゲットのタイプを示すために使用されます。これは、他の要素の中で存在する(またはそうでない)使用される場合があります。場合によっては、ターゲットのタイプは、参照の検査(例:RESTFUL URL)または参照のターゲットを解決することによって決定される場合があります。タイプと参照の両方が提供されている場合、参照は指定したものと同じタイプのリソースに解決するものとします。 / This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from ResourceType
(extensible to http://hl7.org/fhir/ValueSet/resource-types
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Patient.identifier.assigner.identifier
Definition

ターゲットリソースの識別子。これは、他のリソースを直接参照する方法がない場合に使用されます。これは、それが表すエンティティがFHIRサーバーを介して利用できないか、リソースの作成者が既知の識別子を実際の場所に変換する方法がないためです。。Identifierが実際にFHIRインスタンスとして公開されているものを指し示すことを指し示す必要はありませんが、FHIRインスタンスとして公開されると予想されるビジネス概念を指し示し、その場合は参照によって許可されるFHIRリソースタイプ。 / An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

Short文字通りの参照が不明な場合、論理的参照 / Logical reference, when literal reference is not known
Comments

参照の代わりに識別子が提供される場合、参照を処理するシステムは、識別子が使用されるビジネスコンテキストを理解している場合にのみ識別子を参照に解決できます。これはグローバル(たとえば、全国の識別子)であることがありますが、しばしばそうではありません。このため、参照を使用して作業するために説明されている有用なメカニズム(たとえば、チェーン、含まれる)はありません。また、サーバーは参照を解決できるとは期待されていません。サーバーは、識別子ベースの参照を触れずに受け入れ、それを解決し、それを拒否することができます - capabilitystatement.rest.resource.ReferencePolicyを参照してください。

識別子とリテラル参照の両方が提供される場合、リテラル参照が推奨されます。識別子がリテラルリファレンスと一致することを確認するために、リソースの処理リソースの処理が許可されていますが、必須ではありません -

論理参照を文字通り参照に変換するアプリケーションは、論理参照の存在を残すか、それを削除することを選択する場合があります。

参照は、FHIRリソースとして表現できる可能性のある構造を指すことを目的としていますが、実際のFHIRリソースインスタンスとして存在する必要はありません。 。識別子と呼ばれるコンテンツは、参照のために許可されているリソースタイプの制限によって暗示される論理的制約を満たす必要があります。たとえば、タイプが参照されている場合、薬物処方の識別子を送信することは合法ではありません(観察|診断障害)。参照用のユースケースの1つは、FHIR表現が存在しない状況です(タイプが参照(任意)。 / When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.identifier.assigner.display
Definition

リソースリファレンスに加えてリソースを識別するプレーンテキストの叙述(Narative)。 / Plain text narrative that identifies the resource in addition to the resource reference.

Shortリソースのテキスト代替 / Text alternative for the resource
Comments

これは通常、参照されるリソースのリソース.textと同じではありません。目的は、参照されているものを完全に説明するのではなく、特定することです。 / This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.
この患者記録がアクティブに使用されているかどうか。多くのシステムは、このプロパティを使用して、組織のビジネスルールに基づいて一定期間見られなかった患者など、非現在の患者としてマークする。
非アクティブな患者を除外するために患者リストをフィルタリングするためによく使用される。
死亡した患者は、同じ理由で不活性とマークされる場合があるが、死後しばらくは活性である場合がある。

Shortこの患者の記録が積極的に使用されているかどうか / Whether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.
この患者の記録が有効かどうか
誤って患者を登録して削除したい場合などにfalseにする

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid この要素は、レコードの有効・無効判定を示すステータス要素であるため、修飾子としてラベル付けされる
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.
患者レコードが誤って作成された場合のため、使用されないレコードとしてマークできる必要がある。

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element アクティブな要素に値が指定されていない場合、このリソースは通常アクティブであると想定される
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Patient.name
Definition

A name associated with the individual.

個人に関連付けられた名前。

Short患者に関連付けられた名前 / A name associated with the patient
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.
患者は、用途や適用期間が異なる複数の名前を持つ場合がある。動物の場合、名前は人間によって割り当てられて使用され、同じパターンを持つという意味で「HumanName」を使用する。
FHIRデータ型仕様に従って、以下の内容を採用する。

  • 姓名分割できる場合は、名前パート HumanName.familyとHumanName.givenに指定する
  • ミドルネームがある場合は、given に指定する(givenは繰り返し可能)
  • 姓名に分割できない場合は、HumanName.text にフルネームを指定する
  • 各名前パートとtext は、両方存在してもよい
  • 漢字氏名、カナ氏名の区別は、iso21090-EN-representation を使用する
Control1..*
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ extension($iso21090-EN-representation).value
74. Patient.name.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..0
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
76. Patient.name.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
78. Patient.name.extension.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. Patient.name.extension.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
82. Patient.name.extension.url
Definition

拡張コードの定義のソース - 論理名またはURL。 / Source of the definition for the extension code - a logical name or a URL.

Short拡張機能の意味を識別します / identifies the meaning of the extension
Comments

定義は、拡張性コードの計算可能または人間が読み取る可能性のある定義を直接指している場合があります。または、他の仕様で宣言されているように、論理的なURIである場合があります。定義は、拡張機能を定義する構造定義のURIでなければなりません。 / The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
84. Patient.name.extension.value[x]
Definition

拡張値の値 - データ型の制約付きセットの1つでなければなりません(リストの[拡張性](拡張性](拡張性。html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control0..1
Typecode
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name.extension.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
86. Patient.name.extension.value[x]:valueCode
Slice NamevalueCode
Definition

拡張値の値 - データ型の制約付きセットの1つでなければなりません(リストの[拡張性](拡張性](拡張性。html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control0..1
Typecode
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Patient.name.extension:nameRepresentationUse
Slice NamenameRepresentationUse
Definition

Name Representation.

名前の表現方法

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

The transcription of the name - how it is represented (for e.g. Japanese names).

名前の文字起こし-表現方法(日本の名前など)。

Control0..1
TypeExtension(EN-representation) (Extension Type: code)
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
90. Patient.name.use
Definition

Identifies the purpose for this name.

この名前の使用目的

Short通常|公式|温度|ニックネーム|匿名|古い|乙女 / usual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

アプリケーションは、名前が明示的に一時的な名前(temp )あるいは以前の名前だ(old )と設定されていない場合には、現時点での名前だとみなしてよい。

Control0..1
BindingThe codes SHALL be taken from NameUse
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い名前などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

一連の名前の中から、特定の使用状況に適した名前を選択できるようになる。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.name.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

アプリケーションUIなどで、表示する名前全体を指定する。名前の特定の部分の代わり、または特定の部分と同じとして使われることがある。姓と名をこの順番で半角空白1文字を区切り文字として格納する

ShortText representation of the full name 名前全体のテキスト表現。姓と名をこの順番で半角空白1文字を区切り文字として格納する
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

テキスト要素の表現とその部分構成要素の両方を提供できる。名前を更新するアプリケーションは、テキストと部分構成要素の両方が存在する場合、部分構成要素にないコンテンツがテキスト要素に含まれないようにする必要がある。姓と名をこの順番で半角空白1文字を区切り文字として格納する

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

家系図にリンクする名前の部分。一部の文化では、息子の家系の名前は父親の名である。

ShortFamily name (often called 'Surname') 名前のうち姓の部分。ファミリ名
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

ファミリ名は、拡張子(de、nl、es関連のカルチャ)を使用して特定の部分に分解できる。

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Patient.name.given
Definition

Given name.

名前の名の部分。

ShortGiven names (not always 'first'). Includes middle names 名前の名の部分で、ミドルネームを含む
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to practical limitations. This element is not called "first name" since given names do not always come first.

イニシャルのみが記録されている場合は、フルネームの部分の代わりに使用できる。イニシャルは複数の名前に分けることができるが、多くの場合、実用的な制限のためではない。名が常に最初に来るとは限らないため、この要素は「first name」とは呼ばない。

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Patient.name.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の先頭に表示される名前の一部。

ShortParts that come before the name 名前の名の前に来る部分
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.name.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の最後に表示される名前の一部。

ShortParts that come after the name 名前の名のあとに続く部分
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Patient.name.period
Definition

Indicates the period of time when this name was valid for the named person.

この名前が指名された人に対して有効であった期間。

ShortTime period when name was/is in use 名前が使われる期間
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Period(期間)は時間の範囲を指定する。使用状況は、範囲全体が適用されるか(たとえば、「患者はこの時間範囲で入院していた」)、範囲から1つの値が適用されるか(たとえば、「この2回の間に患者に投与する」)を指定する。 Period(期間)は、Duration(時間区間=経過時間の測定値)には使用されない。 [Duration](datatypes.html#Duration)を参照のこと。

Control0..0
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

名前を歴史的な文脈に配置できます。 / Allows names to be placed in historical context.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Patient.name:kanji
Slice Namekanji
Definition

漢字の名前情報

Short漢字の名前情報
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

名前が変更されたり、違っていると指摘されたり、コンテキストによって使われる名前が異なる場合がある。名前は、コンテキストに応じて重要性が異なるさまざまなタイプの部分に分割される場合があり、部分への分割は必ずしも重要ではない。個人名の場合、さまざまな部分に暗黙の意味が含まれている場合と含まれていない場合がある。さまざまな文化が名前の部分にさまざまな重要性を関連付けており、システムが世界中の名前の部分を気にする必要がある程度は大きく異なる。

Control1..1
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Patient.name:kanji.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
108. Patient.name:kanji.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
110. Patient.name:kanji.extension:nameRepresentationUse
Slice NamenameRepresentationUse
Definition

名前表現。 / Name Representation.

ShortABC |IDE |Syl / ABC | IDE | SYL
Comments

名前の転写 - それがどのように表されるか(例:日本語)。 / The transcription of the name - how it is represented (for e.g. Japanese names).

Control0..1
TypeExtension(EN-representation) (Extension Type: code)
Is Modifierfalse
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Patient.name:kanji.extension:nameRepresentationUse.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
114. Patient.name:kanji.extension:nameRepresentationUse.extension
Definition

拡張 / An Extension

Short拡大 / Extension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
116. Patient.name:kanji.extension:nameRepresentationUse.url
Definition

拡張コードの定義のソース - 論理名またはURL。 / Source of the definition for the extension code - a logical name or a URL.

Short拡張機能の意味を識別します / identifies the meaning of the extension
Comments

定義は、拡張性コードの計算可能または人間が読み取る可能性のある定義を直接指している場合があります。または、他の仕様で宣言されているように、論理的なURIである場合があります。定義は、拡張機能を定義する構造定義のURIでなければなりません。 / The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/iso21090-EN-representation
118. Patient.name:kanji.extension:nameRepresentationUse.value[x]
Definition

拡張値の値 - リストのデータ型の制約付きセットの1つである必要があります([拡張性](http://hl7.org/fhir/extensibility.html)を参照)。 / Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

Short拡張値の値 / Value of extension
Control1..1
BindingThe codes SHALL be taken from NameRepresentationUse
(required to http://hl7.org/fhir/ValueSet/name-v3-representation|4.0.1
Typecode
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed ValueIDE
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Patient.name:kanji.use
Definition

Identifies the purpose for this name.

この名前の使用目的

Short通常|公式|温度|ニックネーム|匿名|古い|乙女 / usual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

アプリケーションは、名前が明示的に一時的な名前(temp )あるいは以前の名前だ(old )と設定されていない場合には、現時点での名前だとみなしてよい。

Control0..1
BindingThe codes SHALL be taken from NameUse
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い名前などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

一連の名前の中から、特定の使用状況に適した名前を選択できるようになる。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Patient.name:kanji.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

アプリケーションUIなどで、表示する名前全体を指定する。名前の特定の部分の代わり、または特定の部分と同じとして使われることがある。姓と名をこの順番で半角空白1文字を区切り文字として格納する

ShortText representation of the full name 名前全体のテキスト表現。姓と名をこの順番で半角空白1文字を区切り文字として格納する
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

テキスト要素の表現とその部分構成要素の両方を提供できる。名前を更新するアプリケーションは、テキストと部分構成要素の両方が存在する場合、部分構成要素にないコンテンツがテキスト要素に含まれないようにする必要がある。姓と名をこの順番で半角空白1文字を区切り文字として格納する

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Patient.name:kanji.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

家系図にリンクする名前の部分。一部の文化では、息子の家系の名前は父親の名である。

ShortFamily name (often called 'Surname') 名前のうち姓の部分。ファミリ名
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

ファミリ名は、拡張子(de、nl、es関連のカルチャ)を使用して特定の部分に分解できる。

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. Patient.name:kanji.given
Definition

Given name.

名前の名の部分。

ShortGiven names (not always 'first'). Includes middle names 名前の名の部分で、ミドルネームを含む
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to practical limitations. This element is not called "first name" since given names do not always come first.

イニシャルのみが記録されている場合は、フルネームの部分の代わりに使用できる。イニシャルは複数の名前に分けることができるが、多くの場合、実用的な制限のためではない。名が常に最初に来るとは限らないため、この要素は「first name」とは呼ばない。

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Patient.name:kanji.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の先頭に表示される名前の一部。

ShortParts that come before the name 名前の名の前に来る部分
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Patient.name:kanji.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

学問的、法的な、雇用または貴族の地位などのために称号として取得され、名前の最後に表示される名前の一部。

ShortParts that come after the name 名前の名のあとに続く部分
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size

FHIR文字列のサイズは1MBを超えてはならないことに注意。

Control0..0
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Patient.name:kanji.period
Definition

Indicates the period of time when this name was valid for the named person.

この名前が指名された人に対して有効であった期間。

ShortTime period when name was/is in use 名前が使われる期間
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.

Period(期間)は時間の範囲を指定する。使用状況は、範囲全体が適用されるか(たとえば、「患者はこの時間範囲で入院していた」)、範囲から1つの値が適用されるか(たとえば、「この2回の間に患者に投与する」)を指定する。 Period(期間)は、Duration(時間区間=経過時間の測定値)には使用されない。 [Duration](datatypes.html#Duration)を参照のこと。

Control0..0
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

名前を歴史的な文脈に配置できます。 / Allows names to be placed in historical context.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Patient.name:kana
Slice Namekana
Definition

カタカナの名前情報

Shortカタカナの名前情報
Comments

Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely.

名前が変更されたり、違っていると指摘されたり、コンテキストによって使われる名前が異なる場合がある。名前は、コンテキストに応じて重要性が異なるさまざまなタイプの部分に分割される場合があり、部分への分割は必ずしも重要ではない。個人名の場合、さまざまな部分に暗黙の意味が含まれている場合と含まれていない場合がある。さまざまな文化が名前の部分にさまざまな重要性を関連付けており、システムが世界中の名前の部分を気にする必要がある程度は大きく異なる。

Control0..1
TypeHumanName(JP Core HumanName DataType)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

複数の名前で患者を追跡できる必要がある。例としては、正式名とパートナー名がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Patient.telecom
Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

個人に連絡するための連絡先の詳細(電話番号や電子メールアドレスなど)。

ShortA contact detail for the individual 個人に連絡するための連絡先の詳細
Comments

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

患者は、さまざまな用途または適用期間違いで連絡先を複数の方法を持っている場合がある。緊急時連絡先として、また身元確認を支援するためのオプションが必要になる場合がある。患者当人に直接連絡できない場合があるが、患者を代理できる別の関係者(自宅の電話、またはペットの所有者の電話)を設定する場合もある。

Control0..*
TypeContactPoint
Is Modifierfalse
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

人々は、電話、電子メールなどの何らかの方法で彼らに連絡する(プライマリ)方法を持っている。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
138. Patient.telecom.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
140. Patient.telecom.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
142. Patient.telecom.system
Definition

接触点の通信フォーム - 連絡先を利用するために必要な通信システム。 / Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size
患者の連絡先の種別をValueSet(ContactPointSystem)より選択する。

  • phone : 電話
  • fax : Fax
  • email : 電子メール
  • pager : ポケットベル
  • url : 電話、ファックス、ポケットベル、または電子メールアドレスではなく、URLとして表される連絡先
    これはWebサイト、ブログ、Skype、Twitter、Facebookなどのさまざまな機関または個人の連絡先を対象としている。電子メールアドレスには使用しないこと。
  • sms : SMSメッセージの送信に使用できる連絡先(携帯電話、一部の固定電話など)
  • other : 電話、Fax、ポケットベル、または電子メールアドレスではなく、URLとして表現できない連絡先
    例:内部メールアドレス。これは、URLとして表現できる連絡先(Skype、Twitter、Facebookなど)には使用しないこと。
Control0..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem
(required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Patient.telecom.value
Definition

実際の連絡先ポイントの詳細は、指定された通信システム(つまり、電話番号またはメールアドレス)にとって意味のある形式です。 / The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Short実際の接触点の詳細 / The actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

連絡先の番号やメールアドレス

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

厳密に制御された形式ではないレガシー番号をサポートする必要があります。 / Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Patient.telecom.use
Definition

接触点の目的を特定します。 / Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point 【詳細参照】
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
患者の連絡先の種別をValueSet(ContactPointUse)より選択する。

  • home : 自宅
  • work : 職場
  • temp : 一時的
  • old : 以前の
  • mobile : モバイル機器
Control0..1
BindingThe codes SHALL be taken from ContactPointUse
(required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い連絡先などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

人がこの連絡先を使用する方法を追跡する必要があるため、ユーザーは自分の目的に適したものを選択できます。 / Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Patient.telecom.rank
Definition

連絡先のセットを使用する優先順序を指定します。ランク値が低いコンタクトポイントは、ランク値が高いコンタクトポイントよりも優先されます。 / Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Short優先順序を指定する(1 =最高) / Specify preferred order of use (1 = highest)
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

連絡先の使用順序(1 = 最高)

Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
150. Patient.telecom.period
Definition

接触点が使用されていた期間/使用されています。 / Time period when the contact point was/is in use.

Short接触点が使用されていた時間期間 / Time period when the contact point was/is in use
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times").

Period is not used for a duration (a measure of elapsed time). See Duration.
連絡先が使用されていた/されている期間

Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Patient.gender
Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes. 管理上の性別-患者が管理および記録管理の目的で持つと見なされる性別。

Short男性|女性|その他|わからない / male | female | other | unknown
Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

患者の性別をValueSet(AdministrativeGender)より選択する。 male 男性 female 女性 other その他 unknown 不明

Control1..1
BindingThe codes SHALL be taken from AdministrativeGender
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

(少なくとも)名前と生年月日と組み合わせて、個人の識別に必要です。 / Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Patient.birthDate
Definition

The date of birth for the individual. 個人の生年月日

ShortThe date of birth for the individual 個人の生年月日
Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).
実際の生年月日が不明な場合は、少なくとも推定年を推測として提供する必要があり、時間が必要な場合(出産/乳児ケアシステムなど)に使用できる標準の拡張extension「patient-birthTime」がある。
患者の生年月日をYYYY-MM-DD形式で入れる。
例:1945-08-23

Control1..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

個人の年齢は、多くの臨床プロセスを推進します。 / Age of the individual drives many clinical processes.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
LOINC Code21112-8
156. Patient.deceased[x]
Definition

Indicates if the individual is deceased or not. 個人が死亡しているかどうかを示す。

ShortIndicates if the individual is deceased or not 個人が死亡しているかどうかを示す
Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.
値がない場合は、個人が死亡したかどうかについてのステートメントがないことを意味し、ほとんどのシステムは、値がないことを人が生きていることの兆候として解釈する。
患者が死亡しているかどうかを示す
deceasedBooleanまたはdeceasedDateTimeのどちらかに値が入る

  • deceasedBoolean : true(死亡) / false(生存)
  • deceasedDateTime : 患者の死亡日時
Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifiertrue because この要素は、患者が故人としてマークされると、患者で実行するのに適した行動が著しく異なる可能性があるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

患者が亡くなったという事実は、臨床プロセスに影響を与えます。また、人間のコミュニケーションと関係管理において、その人が生きているかどうかを知る必要があります。 / The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Patient.address
Definition

An address for the individual. 患者の住所。必須。

ShortAn address for the individual 個人の住所 【詳細参照】
Comments

Patient may have multiple addresses with different uses or applicable periods. 患者は、異なる用途または適用可能な期間で複数の住所を持っている可能性がある。

【JP Core仕様】FHIRデータ型仕様に従って、以下の案とした。

  • 住所が構造化されている場合、住所パート Address.country、Address.postalcode、Address.state、Address.city、Address.line に分割して記載する
  • 住所が構造化されていない場合は、Address.text に記述する
  • 各住所パートとtext は、両方存在してもよい

※診療文書構造化記述規約等では、streetAddressLine (FHIRではlineに対応) に指定するとなっていた。

Control0..1
TypeAddress
Is Modifierfalse
Summarytrue
Requirements

連絡、請求、報告の要件のために患者の住所を追跡し、識別を支援する必要がある場合があります。 / May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
160. Patient.address.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
162. Patient.address.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.address.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
164. Patient.address.use
Definition

The purpose of this address. 住所の用途

Shorthome | work | temp | old | billing - purpose of this address 住所の用途 【詳細参照】
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

住所の用途をValueSet(AddressUse)より選択する。

  • home : 自宅
  • work : 職場
  • temp : 一時的
  • old : 以前の
  • billing : 請求書、インボイス、領収書などの送付用
Control0..1
BindingThe codes SHALL be taken from AddressUse
(required to http://hl7.org/fhir/ValueSet/address-use|4.0.1
Typecode
Is Modifiertrue because これは、アプリケーションが一時的または古い住所などを間違えないでください。 / This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

多くのリストから適切なアドレスを選択できるようにします。 / Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Patient.address.type
Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

住所(訪問できる住所)と郵送先住所(私書箱や気付住所など)を区別する。ほとんどのアドレスは両方。

Shortpostal | physical | both 【詳細参照】
Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).
住所の種類をValueSet(AddressType)より選択する。

  • postal : 郵送先 - 私書箱、気付の住所
  • physical : 訪れることのできる物理的な住所
  • both : postalとphysicalの両方
Control0..1
BindingThe codes SHALL be taken from AddressType
(required to http://hl7.org/fhir/ValueSet/address-type|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:both
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. Patient.address.text
Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.
表示するアドレス全体を指定する
例:郵便ラベル。これは、特定の部品の代わりに、または特定の部品と同様に提供される場合がある。

ShortText representation of the address 住所のテキスト表現 【詳細参照】
Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.
テキスト表現とパーツの両方を提供できる。アドレスを更新するアプリケーションは、テキストとパーツの両方が存在する場合、パーツにないコンテンツはテキストに含まれないようにする必要がある。

  • 住所を(都道府県や市町村などに)分離して管理していない場合は、textに入れる。
  • 住所を(都道府県や市町村などに)分離して管理している場合でも、まとめてtextに入れること。
  • 郵便番号は含めない。

例:東京都文京区本郷7-3-1

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

レンダリング可能で、不コード化されていないフォーム。 / A renderable, unencoded form.

Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Patient.address.line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. このコンポーネントには、家番号、アパート番号、通りの名前、通りの方向、P.O。が含まれる。ボックス番号、配達のヒント、および同様の住所情報など。

ShortStreet name, number, direction & P.O. Box etc.ストリート名や番地など 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size 1MBを超えないこと。
【JP Core仕様】state要素とcity要素で表現しなかったそのあとの住所部分を番地以降の部分も含めてすべていれる。
英数字は半角でも全角でもよい。文字列の前後および途中に空白文字を含めないこと。
繰り返し要素が許されているので、区切りを表現したい場合には、複数要素に分けて格納してもよい。

例:本郷7-3-1
例:大字石神976
例:藤崎町大字藤崎字西村1-2 春山荘201号室

Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. Patient.address.city
Definition

The name of the city, town, suburb, village or other community or delivery center. 市、町、郊外、村、その他のコミュニティまたは配達センターの名前。

ShortName of city, town etc. 市区町村名 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size 1MBを超えないこと。
【JP Core仕様】郡市区町村部分だけを「郡」「市」「区」「町」「村」などの文字を含めて設定する。 例:文京区

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Patient.address.district
Definition

管理エリア(郡)の名前。 / The name of the administrative area (county).

ShortDistrict name (aka county) 【詳細参照】
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. 【JP Core仕様】日本の住所では使用しない。

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesCounty
Example<br/><b>General</b>:Madison
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. Patient.address.state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). 国の主権が制限されている国のサブユニット。日本の場合、都道府県名。

ShortSub-unit of country (abbreviations ok) 国の次の地区単位 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size 1MBを超えないこと。
都道府県名。「都」「道」「府」「県」のそれぞれの文字を含める。 例:東京都

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. Patient.address.postalCode
Definition

郵便サービスによって定義された地域を指定する郵便番号。 / A postal code designating a region defined by the postal service.

ShortPostal code for area 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size 1MBを超えないこと。
郵便番号。日本の郵便番号の場合には3桁数字とハイフン1文字と4桁数字からなる半角8文字、または最初の3桁だけの3文字のいずれかとする。 例:113-8655

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesZip
Example<br/><b>General</b>:9132
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Patient.address.country
Definition

Country - a nation as commonly understood or generally accepted. 国-一般的に理解されている、または一般的に受け入れられている国の国名かコード。

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)国名またはISO 3166コード
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.
ISO 3166 3文字コードは、人間が読める国名の代わりに使用する。
ISO 3166の2文字または3文字のコード
日本であれば、jpまたはjpn

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
182. Patient.address.period
Definition

Time period when address was/is in use. 住所が使用されていた(いる)期間

ShortTime period when address was/is in use 住所が使用されていた(いる)期間
Comments

A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
住所が使用されていた/されている期間。
期間は時間の範囲を指定する。使用状況はその期間全体に適用されるか、範囲から1つの値が適用される。
期間は、時間間隔(経過時間の測定値)には使用されない。

Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

アドレスを歴史的な文脈に配置できるようにします。 / Allows addresses to be placed in historical context.

Example<br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. Patient.maritalStatus
Definition

This field contains a patient's most recent marital (civil) status. このフィールドは患者の最新の婚姻(市民)状態が含む。

ShortMarital (civil) status of a patient 患者の婚姻(市民)状態 【詳細参照】
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
患者の婚姻関係をValueSet(Marital Status Codes)より選択する。

  • A : 婚姻取消・無効
  • D : 離婚
  • I : 暫定法令
  • L : 法的別居中
  • M : 既婚
  • P : 一夫多妻制
  • S : 生涯独身・非婚
  • T : 同棲
  • U : 未婚
  • W : 未亡人
  • UNK : 不明
Control0..1
BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
(extensible to http://hl7.org/fhir/ValueSet/marital-status
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

ほとんどの場合、すべてではないにしても、それをキャプチャします。 / Most, if not all systems capture it.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. Patient.multipleBirth[x]
Definition

Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer). 患者が多胎児の一人であるか(boolean)、実際の出生順位(integer)であるかを示す。

ShortWhether patient is part of a multiple birth 患者が多胎出産の一人かどうか
Comments

Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).
multipleBirthBooleanまたはmultipleBirthIntegerのどちらかに値が入る

  • multipleBirthBoolean : 多胎出産時かどうか
    3つ子の例にbooleanが指定された場合、3つの患者レコードすべてがvalueBoolean = trueになる(順序は示されない)
  • multipleBirthInteger : 多胎出産時の出生順位
    たとえば、3つ子の2番目の生まれはvalueInteger = 2で、3番目の生まれはvalueInteger = 3になる
Control0..1
TypeChoice of: boolean, integer
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs. 多産児の曖昧性解消、特にラボなど、医療提供者が患者に会わない場合に関連する。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Patient.photo
Definition

Image of the patient. 患者の画像。

ShortImage of the patient 患者の画像
Comments

Guidelines:

  • Use id photos, not clinical photos.
  • Limit dimensions to thumbnail.
  • Keep byte count low to ease resource updates

ガイドライン:

  • 臨床写真ではなく、身分証明写真を使用すること
  • 寸法をサムネイルに制限する
  • リソースの更新を容易にするため、バイト数を少なくすること
Control0..*
TypeAttachment
Is Modifierfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

多くのEHRシステムには、患者の画像をキャプチャする機能がある。より新しいソーシャルメディアの使用にも適合する。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. Patient.contact
Definition

A contact party (e.g. guardian, partner, friend) for the patient.

患者の連絡先者(例:保護者、パートナー、友人)。

ShortA contact party (e.g. guardian, partner, friend) for the patient 患者の連絡先者(例:保護者、パートナー、友人)
Comments

Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

連絡先には、家族、取引先、保護者、介護者など、あらゆる種類の連絡先が含まれる。連絡先として使用しない親戚や家族を登録するためには適用されない。

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Need to track people you can contact about the patient.

患者について連絡できる人を確認する必要がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
pat-1: 少なくとも連絡先の詳細または組織への参照を含めるものとする / SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
192. Patient.contact.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
194. Patient.contact.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
196. Patient.contact.modifierExtension
Definition

要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
198. Patient.contact.relationship
Definition

The nature of the relationship between the patient and the contact person.

患者と連絡先の関係性。

ShortThe kind of relationship 【詳細参照】
Comments

Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
患者との関係性をValueSet(PatientContactRelationship)より選択する。

  • C : 緊急連絡先
  • E : 雇用者
  • F : 連邦政府機関
  • I : 保険会社
  • N : 近親者
  • S : 州政府機関
  • U : 不明
Control0..*
BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
(extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Used to determine which contact person is the most relevant to approach, depending on circumstances.

状況に応じて、アプローチするのに最適な関係者を決定するために使用される。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Patient.contact.name
Definition

A name associated with the contact person.

連絡先に登録された名前。

Short連絡先に関連付けられた名前 / A name associated with the contact person
Control0..1
TypeHumanName
Is Modifierfalse
Summaryfalse
Requirements

Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

連絡先は名前で識別する必要があるが、その連絡先に複数の名前が必要になることはまれである。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Patient.contact.telecom
Definition

A contact detail for the person, e.g. a telephone number or an email address.

連絡先に登録された連絡方法(電話番号やメールアドレスなど)。

Short人の連絡先の詳細 / A contact detail for the person
Comments

Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

連絡先には、さまざまな用途または適用期間で連絡を取るための複数の方法がある。その人に緊急に連絡する際の連絡先を確認する必要がある。

Control0..*
TypeContactPoint
Is Modifierfalse
Summaryfalse
Requirements

People have (primary) ways to contact them in some way such as phone, email.

電話、電子メールなどの(優先する)連絡方法を確認する必要がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Patient.contact.address
Definition

Address for the contact person. 連絡先の住所。

Short連絡先の住所 / Address for the contact person
Control0..1
TypeAddress
Is Modifierfalse
Summaryfalse
Requirements

Need to keep track where the contact person can be contacted per postal mail or visited. 郵送ないし訪問により連絡を取ることができるよう注意する必要があるため。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. Patient.contact.gender
Definition

Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes. 管理上の性別-連絡先担当者が管理および記録管理のために持っていると考えられる性別。

Short男性|女性|その他|わからない / male | female | other | unknown
Control0..1
BindingThe codes SHALL be taken from AdministrativeGender
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Needed to address the person correctly. その人に正しく話しかけるために必要である。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. Patient.contact.organization
Definition

Organization on behalf of which the contact is acting or for which the contact is working. 連絡先が主として活動する、または勤務している組織。

Short連絡先に関連する組織 / Organization that is associated with the contact
Comments

References SHALL be a reference to an actual FHIR resource, and SHALL be resolvable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

連絡先に関連する組織

Control0..1
This element is affected by the following invariants: pat-1
TypeReference(JP Core Organization Profile)
Is Modifierfalse
Summaryfalse
Requirements

保護者またはビジネス関連の連絡先については、組織が関連しています。 / For guardians or business related contacts, the organization is relevant.

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. Patient.contact.period
Definition

The period during which this contact person or organization is valid to be contacted relating to this patient. この患者に関連して、この連絡担当者または組織に連絡することが有効な期間。

Shortこの患者に関連するこの連絡先または組織が連絡するのが有効な期間 / The period during which this contact person or organization is valid to be contacted relating to this patient
Control0..1
TypePeriod
Is Modifierfalse
Summaryfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Patient.communication
Definition

A language which may be used to communicate with the patient about his or her health. 彼または彼女の健康について患者と会話する際に使用する言語。

ShortA language which may be used to communicate with the patient about his or her health 彼または彼女の健康について患者と会話する際に使用する言語
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.
言語が指定されていない場合、デフォルトのローカル言語が話されていることを意味する。複数のモードの習熟度を伝える必要がある場合は、複数のPatient.Communicationアソシエーションが必要である。動物の場合、言語は関連するフィールドではないため、インスタンスから除外する必要がある。患者がデフォルトの現地言語を話さない場合、通訳者が必要であることを明示的に宣言するために、通訳者必須基準を使用できる。

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.
患者が現地の言語を話さない場合、通訳が必要になる場合があるため、話せる言語と習熟度は、患者と関心のある他の人の両方にとって注意すべき重要な事項である。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Patient.communication.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
216. Patient.communication.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
218. Patient.communication.modifierExtension
Definition

要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
220. Patient.communication.language
Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.
ISO-639-1 alpha 2コード小文字で言語を、またオプションとしてハイフンとISO-3166-1 alpha 2コード大文字を続けて地域を表す。たとえば、英語の場合は「en」、アメリカ英語の場合は「en-US」、イギリス英語の場合は「en-EN」である。

ShortThe language which can be used to communicate with the patient about his or her health 【詳細参照】
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

患者とコミュニケーションするときに使用できる言語をValueSet(CommonLanguages)より選択する。

  • de : ドイツ語
  • en : 英語
  • fr : フランス語
  • ja : 日本語
  • ko : 韓国語
    など
Control1..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. 多言語の国のほとんどのシステムは、言語を伝えたいと考えられる。 すべてのシステムが実際に地域の方言を必要とするわけではない。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
222. Patient.communication.preferred
Definition

Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

患者がこの言語を優先するかどうかを示す(他の言語よりも特定レベルまで習得している)。

Short言語選好インジケーター / Language preference indicator
Comments

This language is specifically identified for communicating healthcare information.

この言語は、医療情報を伝えるために特に識別される。 患者がこの言語を習得している場合はtrue、そうでなければfalseを設定する。

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

特定のレベルまで複数の言語を習得している人は、複数の言語を選択する可能性がある。つまり、特定の言語でのコミュニケーションに自信を持ち、他の言語を一種の備えとしている。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. Patient.generalPractitioner
Definition

Patient's nominated care provider. 患者が指名するケア提供者

ShortPatient's nominated primary care provider 患者が指名するケア提供者
Comments

This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.
Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.
これはプライマリケア提供者(GPを含む)である場合もあれば、コミュニティ/障害を持つ患者指定のケアマネージャーである場合もある。ケアチームの記録には使用されない。これらはケアプランまたはEpisodeOfCareリソースにリンクされるCareTeamリソースに含まれている必要がある。複数のGPは、学期中の大学GPと共にリストされた家庭GPなどの学生や、「フライイン/フライアウト」労働者など、さまざまな理由で患者に対して記録される場合がある。また、医学的問題を認識し続けるために家庭GPに含まれる。
管轄区域は、必要に応じてこれを1、またはタイプごとに1にプロファイルできると決定する場合がある。

Control0..*
TypeReference(JP Core Organization Profile, JP Core Practitioner Profile, JP Core PractitionerRole Profile)
Is Modifierfalse
Summaryfalse
Alternate NamescareProvider
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. Patient.managingOrganization
Definition

Organization that is the custodian of the patient record. 患者記録の管理者である組織。

ShortOrganization that is the custodian of the patient record 患者記録の管理者である組織
Comments

There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

特定の患者記録を管理する組織は1つだけである。他の組織には独自の患者レコードがあり、Linkプロパティを使用してレコードを結合する場合がある(または、関連付けの信頼性評価を含めることができる個人リソース)

Control0..1
TypeReference(JP Core Organization Profile)
Is Modifierfalse
Summarytrue
Requirements

Need to know who recognizes this patient record, manages and updates it.

この患者記録を誰が認識し、管理し、更新するかを知る必要がある。

Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Patient.link
Definition

Link to another patient resource that concerns the same actual patient.

事実上の同一患者をリンクする別のPatientリソース。

ShortLink to another patient resource that concerns the same actual person 事実上の同一患者をリンクする別のPatientリソース
Comments

There is no assumption that linked patient records have mutual links.

リンクされた患者記録に相互リンクがあるという仮定はない。

Control0..*
TypeBackboneElement
Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by' この要素は、メインのPatientリソースではない可能性があるため、修飾子としてラベル付けされ、このPatientレコードの代わりに参照された患者を使用する必要がある。link.type値が 'replaced-by'の場合
Summarytrue
Requirements

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers

複数のユースケースがある。

  • 事務的なエラーのため一貫して人間を特定することが困難であり患者の記録が重複している
  • 複数のサーバにわたり患者情報が配布されている
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. Patient.link.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
232. Patient.link.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
234. Patient.link.modifierExtension
Definition

要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
236. Patient.link.other
Definition

The other patient resource that the link refers to.

リンクが参照する他の患者リソース。

Shortリンクが指す他の患者または関連者のリソース / The other patient or related person resource that the link refers to
Comments

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

ここでRelatedPersonを参照すると、Personレコードを使用して患者とRelatedPersonを同じ個人として関連付ける必要がなくなる。

Control1..1
TypeReference(JP Core Patient Profile, RelatedPerson)
Is Modifierfalse
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
238. Patient.link.type
Definition

The type of link between this patient resource and another patient resource.

この患者リソースと別の患者リソース間のリンクのタイプ。

Shortreplaced-by | replaces | refer | seealso 【詳細参照】
Comments

Note that FHIR strings SHALL NOT exceed 1MB in size
この患者リソースと別の患者リソース間のリンクのタイプをValueSet(LinkType)より選択する。

  • replaced-by : このリンクを含む患者リソースは使用しないこと
  • replaces : このリンクを含む患者リソースは、現在アクティブな患者レコードである
  • refer : このリンクを含む患者リソースは使用中であり、有効であるが、患者に関する主な情報源とは見なされていない
  • seealso : このリンクを含む患者リソースは使用中で有効であるが、同じ人物に関するデータが含まれていることがわかっている別の患者リソースを指す
Control1..1
BindingThe codes SHALL be taken from LinkType
(required to http://hl7.org/fhir/ValueSet/link-type|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))