HL7 FHIR JP Core ImplementationGuide
1.2.0-a - release Japan flag

HL7 FHIR JP Core ImplementationGuide - Local Development build (v1.2.0-a) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Data Type Profile: JP_MedicationDosageBase - Detailed Descriptions

Active as of 2024-12-30

Definitions for the jp-medicationdosagebase data type profile.

Guidance on how to interpret the contents of this table can be found here

0. Dosage
Definition

薬の服用方法・服用した方法、または服用すべき方法

Short薬の服用方法・服用した方法、または服用すべき方法
Control0..*
Is Modifierfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. Dosage.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Dosage.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Dosage.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Dosage.modifierExtension
    Definition

    要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

    モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Dosage.sequence
    Definition

    どの服用指示を適応するか判断するかについての順序を示したもの

    Short服用指示の順番
    Comments

    32 bitの数値。これ以上の値であれば10進数を使うこと。

    Control0..1
    Typeinteger
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    もし、複数の服用法(Dosage)でsequenceの数値が同じであれば、その指示が同時に扱われることを示している。sequenceの数値が異なれば、服用指示(Dosage)の順番を意図している。

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Dosage.text
    Definition

    投与⽅法のテキスト表現。コードで指定できない場合、本要素で文字列として指定してもよい。

    Short投与⽅法のテキスト表現
    Comments

    textエレメントはcodingのdisplayNameエレメントと一致することがよくある。

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    ターミノロジ由来のコードは必ずしも人間が使う言葉の全てのニュアンスを含めた正確な意味を捉えているわけではなく、適切なコードが見つからない場合もある。そのような場合でもtextエレメントは元々の意味のすべてを捉えるために使うことができる。

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Dosage.additionalInstruction
    Definition

    どのように薬剤を内服するかについての患者への補足指示(たとえば、「食事と一緒に」や「30分から1時間前に内服」)や薬剤についての注意書き(たとえば、「眠くなることがある」や「日光や紫外線が皮膚にあたららないようにすること」)

    Short患者に対する補足指示や注意。たとえば、「食事と一緒に」「眠くなることがある」
    Comments

    薬剤投与や調剤についての情報(たとえば、「腹膜内ポートに可能な限り迅速に注入」や「薬剤Xの直後に」)であり、dosage.textにも複製されるべきである。

    Control0..*
    BindingThe codes SHOULD be taken from JP Core Medication JAMI Additional Usage ValueSet
    (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationUsageJAMIAdditional_VS)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    補足指示はコード化されるように意図されているが、コードがない場合はエレメントはテキストだけで表現することができる。たとえば、「大量の水で服用する」という指示はコード化されていることもあれば、されていないことおある。

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Dosage.patientInstruction
    Definition

    患者あるいは消費者に理解してもらうための指示。

    Short患者あるいは消費者向けの指示
    Comments

    FHIRの文字列は1MB以上の大きさとなってなはらない(SHALL NOT)。

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Dosage.timing
    Definition

    薬を投与する必要がある場合。 / When medication should be administered.

    Short薬を投与する必要がある場合 / When medication should be administered
    Comments

    この属性は、Dosage.Textが入力されると予想される間、常に埋め込まれるとは限りません。両方が入力されている場合、Dosage.textはDosage.timingの内容を反映する必要があります。 / This attribute might not always be populated while the Dosage.text is expected to be populated. If both are populated, then the Dosage.text should reflect the content of the Dosage.timing.

    Control0..1
    TypeTiming(JP Core Medication Timing DataType)
    Is Modifierfalse
    Summarytrue
    Requirements

    患者に薬を与えるためのタイミングスケジュール。このデータ型により、さまざまな式が可能になります。たとえば、「8時間ごと」。"一日に三回";「2011年12月23日から10日間の朝食の1/2の1/2:」;「2013年10月15日、2013年10月17日、2013年11月1日」。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / The timing schedule for giving the medication to the patient. This data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013". Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Dosage.asNeeded[x]
    Definition

    【JP Core仕様】頓用型の用法を指定する場合に”true”を指定し、そのコードを指定する場合は用法コードとして指定する。
    Medication(薬剤)が必要なときに指定された量とスケジュールのみで投薬するか(Booleanで選択される)、投薬する前提条件はTiming.Code(CodeableConcept)を示している。

    Short「頓用」指示
    Comments

    boolean = trueを設定することにより、理由なしに「必要に応じて」表現できます。この場合、codeableconceptは存在しません。または、Codeableconceptを含めることにより、「必要に応じて」理由で「必要に応じて」表現することができます。この場合、ブール値は真であると想定されています。ブール値をfalseに設定すると、用量はスケジュールに従って与えられ、「PRN」または「必要に応じて」ではありません。 / Can express "as needed" without a reason by setting the Boolean = True. In this case the CodeableConcept is not populated. Or you can express "as needed" with a reason by including the CodeableConcept. In this case the Boolean is assumed to be True. If you set the Boolean to False, then the dose is given according to the schedule and is not "prn" or "as needed".

    Control0..1
    Typeboolean
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Dosage.site
    Definition

    投与される身体部位。外用薬で部位を指定する場合に使用する。

    Short投与される身体部位
    Comments

    もし、BodySite resourceの属性が必要な場合(たとえば、部位の指定や別々に投与経路を設定する場合)は、bodySiteの標準拡張を使うこと。要約コードや非常に正確な位置の定義へのreferenceを使用することもできる。
    【JP Core仕様】JAMI外用部位3桁コードを使用することが望ましいが、ローカルコードも使用可能。

    Control0..1
    BindingThe codes SHOULD be taken from JP Core Medication JAMI External Body Site ValueSet
    (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationBodySiteJAMIExternal_VS)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    薬が最初に体に入る解剖学的部位のコード化された仕様。 / A coded specification of the anatomic site where the medication first enters the body.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Dosage.route
    Definition

    投与経路

    Short投与経路
    Comments

    投与経路の一般的パターンに全てのターミノロジが適応しているわけではない。情報モデルはCodeableConceptではなく、直接Codingをを使用してテキストやコーディング、翻訳、そしてエレメントと事前条件、事後条件の関係について管理するためにその構造を提示する必要がある。
    【JP Core仕様】HL7表0162をベースにした投与経路コードを使用することが望ましいが、ローカルコードも使用可能。

    Control0..1
    BindingThe codes SHOULD be taken from JP Core Medication HL70162-based Route ValueSet
    (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationRouteHL70162_VS)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    患者の体への、または患者の体内への治療剤の投与のルートまたは生理学的経路を指定するコード。 / A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Dosage.method
    Definition

    投与方法

    Short投与方法
    Comments

    ターミノロジは投与する経路あるいは剤型をあらかじめ指定するために用いられる。

    Control0..1
    BindingFor example codes, see SNOMEDCTAdministrationMethodCodes
    (example to http://hl7.org/fhir/ValueSet/administration-method-codes)

    薬が投与される手法を説明するコード化された概念。 / A coded concept describing the technique by which the medicine is administered.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    コード化された値は体内に薬剤が投与される方法を示している。注射ではよく使われる。たとえば、緩徐に注入、深部に静注など。

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Dosage.method.id
    Definition

    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    Short要素間参照のための一意のID / Unique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    28. Dosage.method.extension
    Definition

    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Dosage.method.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 30. Dosage.method.coding
      Definition

      用語システムによって定義されたコードへの参照。 / A reference to a code defined by a terminology system.

      Short用語システムによって定義されたコード / Code defined by a terminology system
      Comments

      コードは、列挙されたCTなどの非常に正式な定義まで、列挙またはコードリストで非常にさりげなく定義される場合があります。詳細については、HL7 V3コアプリンシップを参照してください。コーディングの順序付けは未定義であり、意味を推測するために使用されません。一般に、せいぜい、コーディング値の1つのみがuserselected = trueとしてラベル付けされます。 / Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      コードシステム内の代替エンコーディング、および他のコードシステムへの翻訳が可能になります。 / Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Dosage.method.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 32. Dosage.method.coding:unitDigit1
        Slice NameunitDigit1
        Definition

        投与⽅法に対応するJAMI 用法コード表基本用法1桁コードを識別するURI。

        Short投与⽅法に対応するJAMI 用法コード表基本用法1桁コード
        Comments

        コードは臨時で列記したものや、コードのリストからSNOMED CTのように公式に定義されたものまである(HL7 v3 core principle を参照)。FHIR自体ではコーディング規約を定めてはいないし、意味を暗示するために利用されない(SHALL NOT)。一般的に UserSelected = trueの場合には一つのコードシステムが使われる。

        Control0..1
        BindingThe codes SHOULD be taken from JP Core Medication JAMI Basic Usage Type ValueSet
        (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationMethodJAMIBasicUsage_VS)
        TypeCoding
        Is Modifierfalse
        Summarytrue
        Requirements

        他のコードシステムへの変換や代替のコードシステムを使ってエンコードしてもよい。

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Dosage.method.coding:unitDigit1.id
        Definition

        リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        Short要素間参照のための一意のID / Unique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        36. Dosage.method.coding:unitDigit1.extension
        Definition

        要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        Short実装で定義された追加のコンテンツ / Additional content defined by implementations
        Comments

        拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Dosage.method.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 38. Dosage.method.coding:unitDigit1.system
          Definition

          コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

          Short用語システムのアイデンティティ / Identity of the terminology system
          Comments

          uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

          Control1..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

          Fixed Valuehttp://jami.jp/CodeSystem/MedicationMethodBasicUsage
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Dosage.method.coding:unitDigit1.version
          Definition

          このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

          Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
          Comments

          用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

          NoteThis is a business version Id, not a resource version Id (see discussion)
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Dosage.method.coding:unitDigit1.code
          Definition

          システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

          Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
          Control0..1
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Dosage.method.coding:unitDigit1.display
          Definition

          システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

          Shortシステムによって定義された表現 / Representation defined by the system
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Dosage.method.coding:unitDigit1.userSelected
          Definition

          このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

          Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
          Comments

          一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

          Control0..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Dosage.method.coding:unitDigit2
          Slice NameunitDigit2
          Definition

          投与⽅法に対応するJAMI 用法コード表基本用法2桁コードを識別するURI。2桁コードhttp://jami.jp/CodeSystem/MedicationUsage

          Short投与⽅法に対応するJAMI 用法コード表基本用法2桁コード
          Comments

          コードは臨時で列記したものや、コードのリストからSNOMED CTのように公式に定義されたものまである(HL7 v3 core principle を参照)。FHIR自体ではコーディング規約を定めてはいないし、意味を暗示するために利用されない(SHALL NOT)。一般的に UserSelected = trueの場合には一つのコードシステムが使われる。

          Control0..1
          BindingThe codes SHOULD be taken from JP Core Medication JAMI Detail Usage ValueSet
          (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationMethodJAMIDetailUsage_VS)
          TypeCoding
          Is Modifierfalse
          Summarytrue
          Requirements

          他のコードシステムへの変換や代替のコードシステムを使ってエンコードしてもよい。

          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Dosage.method.coding:unitDigit2.id
          Definition

          リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Short要素間参照のための一意のID / Unique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          52. Dosage.method.coding:unitDigit2.extension
          Definition

          要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          Short実装で定義された追加のコンテンツ / Additional content defined by implementations
          Comments

          拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Dosage.method.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 54. Dosage.method.coding:unitDigit2.system
            Definition

            コード内のシンボルの意味を定義するコードシステムの識別。 / The identification of the code system that defines the meaning of the symbol in the code.

            Short用語システムのアイデンティティ / Identity of the terminology system
            Comments

            uriは、oid(urn:oid:...)またはuuid(urn:uuid:...)である場合があります。OIDとUUIDは、HL7 OIDレジストリへの参照となります。それ以外の場合、URIは、FHIRの特別なURIを定義したHL7のリストから来るか、システムを明確かつ明確に確立する定義を参照する必要があります。 / The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            シンボルの定義のソースについて明確である必要があります。 / Need to be unambiguous about the source of the definition of the symbol.

            Fixed Valuehttp://jami.jp/CodeSystem/MedicationMethodDetailUsage
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Dosage.method.coding:unitDigit2.version
            Definition

            このコードを選択するときに使用されたコードシステムのバージョン。コードの意味がバージョン全体で一貫しているため、適切にメンテナンスしたコードシステムでは報告されたバージョンを必要としないことに注意してください。ただし、これは一貫して保証することはできず、意味が一貫していることが保証されていない場合、バージョンを交換する必要があります。 / The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

            Shortシステムのバージョン - 関連する場合 / Version of the system - if relevant
            Comments

            用語がコードシステムバージョンを識別するために使用する文字列を明確に定義していない場合、推奨は、そのバージョンがバージョンの日付として公式に公開された日付(FHIR日付形式で表現)を使用することです。 / Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Dosage.method.coding:unitDigit2.code
            Definition

            システムによって定義された構文のシンボル。シンボルは、定義されたコードまたはコーディングシステムによって定義された構文の式(例:調整後)である場合があります。 / A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

            Shortシステムによって定義された構文のシンボル / Symbol in syntax defined by the system
            Control0..1
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            システム内の特定のコードを参照する必要があります。 / Need to refer to a particular code in the system.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Dosage.method.coding:unitDigit2.display
            Definition

            システムのルールに従って、システム内のコードの意味の表現。 / A representation of the meaning of the code in the system, following the rules of the system.

            Shortシステムによって定義された表現 / Representation defined by the system
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            システムを知らない読者のために、コードの人間の読み取り可能な意味を持ち込むことができる必要があります。 / Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Dosage.method.coding:unitDigit2.userSelected
            Definition

            このコーディングがユーザーによって直接選択されたことを示します。利用可能なアイテムのピックリスト(コードまたはディスプレイ)。 / Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

            Shortこのコーディングがユーザーによって直接選択された場合 / If this coding was chosen directly by the user
            Comments

            一連の代替案の中で、直接選択されたコードが新しい翻訳の最も適切な出発点です。この要素の使用とその結果をより完全に明確にするためには、「直接選択された」ことについては曖昧さがあり、取引パートナー契約が必要になる場合があります。 / Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            これは、臨床安全基準として特定されています - この正確なシステム/コードペアは、いくつかのルールまたは言語処理に基づいてシステムによって推測されるのではなく、明示的に選択されたことです。 / This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Dosage.method.text
            Definition

            投与⽅法のテキスト表現。コードで指定できない場合、本要素で文字列として指定してもよい。

            Short投与⽅法のテキスト表現
            Comments

            textエレメントはcodingのdisplayNameエレメントと一致することがよくある。

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            ターミノロジ由来のコードは必ずしも人間が使う言葉の全てのニュアンスを含めた正確な意味を捉えているわけではなく、適切なコードが見つからない場合もある。そのような場合でもtextエレメントは元々の意味のすべてを捉えるために使うことができる。

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Dosage.doseAndRate
            Definition

            薬剤が投与される量

            Short薬剤の投与量
            Control0..*
            TypeElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Dosage.doseAndRate.id
            Definition

            リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Short要素間参照のための一意のID / Unique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            70. Dosage.doseAndRate.extension
            Definition

            要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            Short実装で定義された追加のコンテンツ / Additional content defined by implementations
            Comments

            拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Dosage.doseAndRate.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 72. Dosage.doseAndRate.type
              Definition

              力価区分

              Short力価区分
              Comments

              投与速度・量の一般的パターンに全てのターミノロジが適応しているわけではない。情報モデルはCodeableConceptではなく、直接Codingをを使用してテキストやコーディング、翻訳、そしてエレメントと事前条件、事後条件の関係について管理するためにその構造を提示する必要がある。

              Control0..1
              BindingThe codes SHOULD be taken from JP Core Medication IngredientStrength StrengthType ValueSet
              (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_MedicationIngredientStrengthStrengthType_VS)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              このtypeに値が指定されていなければ、"ordered"であることが想定される。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Dosage.doseAndRate.dose[x]
              Definition

              用量あたりの薬の量。 / Amount of medication per dose.

              Short用量あたりの薬の量 / Amount of medication per dose
              Comments

              これは、各有効成分の量ではなく、指定された薬の量を指定することに注意してください。各成分の量は、投薬資源で伝えることができます。たとえば、タブレットが375 mgであることを伝えたい場合は、用量が1つの錠剤であることを伝えたい場合は、薬物リソースを使用して、錠剤が375 mgの薬物XYZで構成されていることを文書化できます。あるいは、用量が375 mgの場合、これが錠剤であることを示すために投薬資源を使用するだけでいいかもしれません。例がドーパミンなどのIVであり、400mgのドーパミンが500 mLのIV溶液で混合されたことを伝えたい場合、これはすべて投薬資源で伝えられます。政権が瞬時であることを意図していない場合(レートが存在するか、タイミングに期間があります)、これは、スケジュールで示されるように、期間にわたって管理される合計額を伝えるために指定できます。 500 mlの用量で、これを4時間以上行う必要があることを伝えるタイミングが使用されます。 / Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

              Control0..1
              TypeQuantity(SimpleQuantity)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Requirements

              1つの投与イベントで与えられた治療またはその他の物質の量。 / The amount of therapeutic or other substance given at one administration event.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Dosage.doseAndRate.rate[x]
              Definition

              薬剤が投与される量の速度

              Short薬剤の投与量速度
              Comments

              レートとデスケーティティの両方を供給して、薬の投与と供給の方法についての詳細を提供することができます。レートが時間の経過とともに変化することを目的としている場合、ローカルのルール/規制に応じて、各変更は、更新されたレートのある薬物療法の新しいバージョンとしてキャプチャするか、新しいレートで新しい薬物採取でキャプチャされる必要があります。

              レート(100 ml/hour)を使用して、時間の経過とともにレートを指定することができます。RateQuantityアプローチでは、時間が分母として指定されている特定の比率ではなく、ML/時間が含まれているUCUMグラマーを解析する機能をシステムに持つ必要があります。2時間にわたって500mlなどのレートが指定されている場合、250 mg/時のレートの量を使用して指定するよりも、定量的に正しい場合があります。 / It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate.

              It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.

              Control0..1
              TypeChoice of: Ratio, Range, Quantity(SimpleQuantity)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Requirements

              患者に薬が導入された、または導入される速度を識別します。通常、注入のレート。1時間あたり100 mlまたは100 ml/hr。また、時間単位あたりのレートとして表現することもできます。2時間あたり500 ml。その他の例:200 mcg/minまたは200 mcg/1分。1リットル/8時間。時には、総量 /持続時間として表される場合、レートは期間を意味する場合があります(たとえば、500ml / 2時間は2時間の期間を意味します)。ただし、レートが期間(250ml/hour)を意味しない場合、期間にわたって注入を伝えるためにタイミング.repeat.durationが必要です。 / Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours. Sometimes, a rate can imply duration when expressed as total volume / duration (e.g. 500mL/2 hours implies a duration of 2 hours). However, when rate doesn't imply duration (e.g. 250mL/hour), then the timing.repeat.duration is needed to convey the infuse over time period.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Dosage.maxDosePerPeriod
              Definition

              単位時間当たりの投薬量の上限

              Short単位時間当たりの投薬量の上限
              Comments

              これは、上限があるときに投与量の補助として使用することを目的としています。たとえば、「4時間ごとに最大8時間あたり2錠」。 / This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day".

              Control0..1
              TypeRatio(JP Core Medication Rate Ratio DataType)
              Is Modifierfalse
              Summarytrue
              Requirements

              期間にわたって被験者に投与される可能性のある治療物質の最大総量。たとえば、24時間で1000mg。 / The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Dosage.maxDosePerAdministration
              Definition

              1回あたりの投薬量の上限

              Short1回あたりの投薬量の上限
              Comments

              これは、上限があるときに投与量の補助として使用することを目的としています。たとえば、5〜10分間で1.5 mg/m2(最大2 mg)IVなどの最大量の体積領域に関連する用量に関連する用量は、1.5 mg/m2、最大2 mgのDosequantityになります。 / This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.

              Control0..1
              TypeQuantity(JP Core Medication Quantity DataType)
              Is Modifierfalse
              Summarytrue
              Requirements

              投与ごとの被験者に投与される可能性のある治療物質の最大総量。 / The maximum total quantity of a therapeutic substance that may be administered to a subject per administration.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              82. Dosage.maxDosePerLifetime
              Definition

              生涯の投薬量の上限

              Short生涯の投薬量の上限
              Control0..1
              TypeQuantity(JP Core Medication Quantity DataType)
              Is Modifierfalse
              Summarytrue
              Requirements

              被験者の寿命ごとに投与される可能性のある治療物質の最大総量。 / The maximum total quantity of a therapeutic substance that may be administered per lifetime of the subject.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              本実装ガイドへのご質問・ご指摘については、GitHub IssueおよびGitHub PullRequestにて受け付けている。