HL7 FHIR JP Core ImplementationGuide
1.1.1 - release
HL7 FHIR JP Core ImplementationGuide - Local Development build (v1.1.1). See the Directory of published versions
Active as of 2022-10-31 |
Definitions for the jp-medicationrange-unitoftime data type profile.
1. Range | |
Definition | 範囲指定された時間の上限下限 A set of ordered Quantities defined by a low and high limit. |
Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
2. Range.low | |
3. Range.low.value | |
Definition | 時間範囲(下限) |
Control | 0..? |
4. Range.low.unit | |
Control | 0..? |
5. Range.low.system | |
Definition | UCUMを識別するURL。固定値。 |
Control | 0..? |
6. Range.low.code | |
Control | 0..? |
Binding | The codes SHOULD be taken from UnitsOfTime |
7. Range.high | |
8. Range.high.value | |
Definition | 時間範囲(上限) |
Control | 0..? |
9. Range.high.unit | |
Control | 0..? |
10. Range.high.system | |
Definition | UCUMを識別するURL。固定値。 |
Control | 0..? |
11. Range.high.code | |
Control | 0..? |
Binding | The codes SHOULD be taken from UnitsOfTime |
1. Range | |
Definition | 範囲指定された時間の上限下限 A set of ordered Quantities defined by a low and high limit. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 The stated low and high value are assumed to have arbitrarily high precision when it comes to determining which values are in the range. I.e. 1.99 is not in the range 2 -> 3. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) rng-2: If present, low SHALL have a lower value than high (: low.empty() or high.empty() or (low <= high)) |
2. Range.low | |
Definition | The low limit. The boundary is inclusive. |
Control | 0..1 |
Type | Quantity(SimpleQuantity) |
Comments | If the low element is missing, the low boundary is not known. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
3. Range.low.value | |
Definition | 時間範囲(下限) The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
Control | 0..1 |
Type | decimal |
Requirements | Precision is handled implicitly in almost all cases of measurement. |
Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
4. Range.low.comparator | |
Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
Control | 0..01 |
Binding | The codes SHALL be taken from QuantityComparator How the Quantity should be understood and represented. |
Type | code |
Is Modifier | true |
Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
Meaning if Missing | If there is no comparator, then there is no modification of the value |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
5. Range.low.unit | |
Definition | A human-readable form of the unit. |
Control | 0..1 |
Type | string |
Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
6. Range.low.system | |
Definition | UCUMを識別するURL。固定値。 The identification of the system that provides the coded form of the unit. |
Control | 0..1 This element is affected by the following invariants: qty-3 |
Type | uri |
Requirements | Need to know the system that defines the coded form of the unit. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
7. Range.low.code | |
Definition | A computer processable form of the unit in some unit representation system. |
Control | 0..1 |
Binding | The codes SHOULD be taken from UnitsOfTimeFor codes, see (unbound) |
Type | code |
Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
8. Range.high | |
Definition | The high limit. The boundary is inclusive. |
Control | 0..1 |
Type | Quantity(SimpleQuantity) |
Comments | If the high element is missing, the high boundary is not known. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
9. Range.high.value | |
Definition | 時間範囲(上限) The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
Control | 0..1 |
Type | decimal |
Requirements | Precision is handled implicitly in almost all cases of measurement. |
Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. Range.high.comparator | |
Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
Control | 0..01 |
Binding | The codes SHALL be taken from QuantityComparator How the Quantity should be understood and represented. |
Type | code |
Is Modifier | true |
Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
Meaning if Missing | If there is no comparator, then there is no modification of the value |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
11. Range.high.unit | |
Definition | A human-readable form of the unit. |
Control | 0..1 |
Type | string |
Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
12. Range.high.system | |
Definition | UCUMを識別するURL。固定値。 The identification of the system that provides the coded form of the unit. |
Control | 0..1 This element is affected by the following invariants: qty-3 |
Type | uri |
Requirements | Need to know the system that defines the coded form of the unit. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
13. Range.high.code | |
Definition | A computer processable form of the unit in some unit representation system. |
Control | 0..1 |
Binding | The codes SHOULD be taken from UnitsOfTimeFor codes, see (unbound) |
Type | code |
Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
1. Range | |
Definition | 範囲指定された時間の上限下限 |
Control | 0..* This element is affected by the following invariants: ele-1 |
Comments | 時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。 |
2. Range.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
3. Range.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensionsuser content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Range.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
4. Range.low | |
Definition | The low limit. The boundary is inclusive. |
Control | 0..1 |
Type | Quantity(SimpleQuantity) |
Comments | If the low element is missing, the low boundary is not known. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
5. Range.low.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
6. Range.low.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensionsuser content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Range.low.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Range.low.value | |
Definition | 時間範囲(下限) |
Control | 0..1 |
Type | decimal |
Requirements | Precision is handled implicitly in almost all cases of measurement. |
Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
8. Range.low.comparator | |
Definition | Not allowed to be used in this context |
Control | 0..0 |
Binding | The codes SHALL be taken from QuantityComparator How the Quantity should be understood and represented |
Type | code |
Is Modifier | true |
Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
Meaning if Missing | If there is no comparator, then there is no modification of the value |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
9. Range.low.unit | |
Definition | A human-readable form of the unit. |
Control | 0..1 |
Type | string |
Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. Range.low.system | |
Definition | UCUMを識別するURL。固定値。 |
Control | 0..1 This element is affected by the following invariants: qty-3 |
Type | uri |
Requirements | Need to know the system that defines the coded form of the unit. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
11. Range.low.code | |
Definition | A computer processable form of the unit in some unit representation system. |
Control | 0..1 |
Binding | The codes SHOULD be taken from UnitsOfTime |
Type | code |
Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
12. Range.high | |
Definition | The high limit. The boundary is inclusive. |
Control | 0..1 |
Type | Quantity(SimpleQuantity) |
Comments | If the high element is missing, the high boundary is not known. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
13. Range.high.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
14. Range.high.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensionsuser content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Range.high.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
15. Range.high.value | |
Definition | 時間範囲(上限) |
Control | 0..1 |
Type | decimal |
Requirements | Precision is handled implicitly in almost all cases of measurement. |
Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
16. Range.high.comparator | |
Definition | Not allowed to be used in this context |
Control | 0..0 |
Binding | The codes SHALL be taken from QuantityComparator How the Quantity should be understood and represented |
Type | code |
Is Modifier | true |
Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
Meaning if Missing | If there is no comparator, then there is no modification of the value |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
17. Range.high.unit | |
Definition | A human-readable form of the unit. |
Control | 0..1 |
Type | string |
Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
18. Range.high.system | |
Definition | UCUMを識別するURL。固定値。 |
Control | 0..1 This element is affected by the following invariants: qty-3 |
Type | uri |
Requirements | Need to know the system that defines the coded form of the unit. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
19. Range.high.code | |
Definition | A computer processable form of the unit in some unit representation system. |
Control | 0..1 |
Binding | The codes SHOULD be taken from UnitsOfTime |
Type | code |
Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |