SEAMAT2FHIR ドラフト版
0.1.1 - draft Japan

SEAMAT2FHIR ドラフト版 - Local Development build (v0.1.1) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: JP_Observation_SEAMAT - Detailed Descriptions

Active as of 2023-11-13

Definitions for the jp-observation-seamat resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Observation
Definition

SEAMATの測定結果/解析結果の格納に使用する。

ShortSEAMATの測定結果/解析結果
Invariantsobservation-metaprofile: meta.profileには、指定したプロファイルのURLの記述が存在しなければならない。 (meta.profile.where($this = 'http://jpfhir.jp/fhir/SEAMAT/StructureDefinition/JP_Observation_SEAMAT').exists())
2. Observation.meta
4. Observation.meta.lastUpdated
Control1..?
Must Supporttrue
6. Observation.meta.profile
Control1..?
Must Supporttrue
8. Observation.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ system
  • 10. Observation.identifier:resourceId
    Slice NameresourceId
    Definition

    Unique instance identifiers assigned to a device by manufacturers other organizations or owners.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    Must Supporttrue
    12. Observation.identifier:resourceId.system
    Control1..?
    Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/resourceInstance-identifier
    14. Observation.identifier:resourceId.value
    Control1..?
    Must Supporttrue
    16. Observation.identifier:bundleId
    Slice NamebundleId
    Definition

    文書Bundleの固定識別番号。Bundle.identifier と同じ値を指定する。

    Short文書Bundleの固定識別番号。
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..1
    Must Supporttrue
    18. Observation.identifier:bundleId.system
    Control1..?
    Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/documentInstance-identifier
    20. Observation.identifier:bundleId.value
    Control1..?
    Must Supporttrue
    22. Observation.status
    Fixed Valuefinal
    24. Observation.code
    Definition

    Describes what was observed. Sometimes this is called the observation "name".

    検査の内容の説明。検査名称。

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/code

    26. Observation.subject
    Control1..?
    TypeReference(SEAMAT Common Patient Profile)
    28. Observation.value[x]
    Definition

    The information determined as a result of making the observation, if the information has a simple value.

    検体検査の結果として決定された情報。

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value

    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    30. Observation.dataAbsentReason
    Definition

    Provides a reason why the expected value in the element Observation.value[x] is missing.

    検査結果値が欠落している理由。

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/@nullFlavor

    32. Observation.component
    34. Observation.component.code
    Definition

    Describes what was observed. Sometimes this is called the observation "code".

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/code

    36. Observation.component.value[x]
    Definition

    The information determined as a result of making the observation, if the information has a simple value.

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/value

    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    38. Observation.component.dataAbsentReason
    Definition

    Provides a reason why the expected value in the element Observation.component.value[x] is missing.

    【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/value/@nullFlavor

    Guidance on how to interpret the contents of this table can be found here

    0. Observation
    Definition

    SEAMATの測定結果/解析結果の格納に使用する。


    患者、デバイス、またはその他の主題について行われた測定と簡単な主張。 / Measurements and simple assertions made about a patient, device or other subject.

    ShortSEAMATの測定結果/解析結果測定と簡単なアサーション / Measurements and simple assertions
    Comments

    すべてのObservation(検査測定や観察事実)の共通部分のプロファイル


    デバイスの測定、実験室の原子結果、バイタルサイン、身長、体重、喫煙状況、コメントなどの単純な観測に使用されます。その他のリソースは、実験室レポートなどの観察のコンテキストを提供するために使用されます。 / Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
    obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
    observation-metaprofile: meta.profileには、指定したプロファイルのURLの記述が存在しなければならない。 (meta.profile.where($this = 'http://jpfhir.jp/fhir/SEAMAT/StructureDefinition/JP_Observation_SEAMAT').exists())
    dom-4: リソースが別のリソースに含まれている場合、meta.versionidもmeta.lastupdatedも持ってはならない。 / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
    2. Observation.meta
    Definition

    リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    Shortリソースに関するメタデータ / Metadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Observation.meta.lastUpdated
    Definition

    リソースが最後に変更されたとき - 例えば、バージョンが変更されたとき。

    Shortリソースのバージョンが最後に変更されたとき
    Comments

    この値はリソースが初めて作成される場合を除いて常に設定されています。サーバー/リソースマネージャーがこの値を設定します。クライアントが提供する値は関係ありません。これはHTTP Last-Modifiedに相当し、readのインタラクションで同じ値を持つべきです。

    Control10..1
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
    6. Observation.meta.profile
    Definition

    このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

    Shortこのリソースが適合を主張するプロファイル
    Comments

    これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

    Control10..*
    Typecanonical(StructureDefinition)
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
    8. Observation.implicitRules
    Definition

    リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
    Comments

    このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Observation.modifierExtension
    Definition

    リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

    モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    Short無視できない拡張機能 / Extensions that cannot be ignored
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Observation.identifier
    Definition

    このObservationリソースの一意な識別ID


    この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

    ShortこのObservationリソースの一意な識別ID観察のためのビジネス識別子 / Business Identifier for observation
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..*
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

    Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ system
    • 14. Observation.identifier:resourceId
      Slice NameresourceId
      Definition

      Unique instance identifiers assigned to a device by manufacturers other organizations or owners.


      この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

      ShortこのObservationリソースの一意な識別ID観察のためのビジネス識別子 / Business Identifier for observation
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Observation.identifier:resourceId.use
      Definition

      この識別子の目的。 / The purpose of this identifier.

      Short通常|公式|一時的|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
      Comments

      アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Observation.identifier:resourceId.system
      Definition

      値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short識別子値の名前空間 / The namespace for the identifier value
      Comments

      識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/resourceInstance-identifier
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Observation.identifier:resourceId.value
      Definition

      通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short一意の値 / The value that is unique
      Comments

      値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Observation.identifier:bundleId
      Slice NamebundleId
      Definition

      文書Bundleの固定識別番号。Bundle.identifier と同じ値を指定する。


      この観察に割り当てられた一意の識別子。 / A unique identifier assigned to this observation.

      Short文書Bundleの固定識別番号。観察のためのビジネス識別子 / Business Identifier for observation
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control10..1*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Observation.identifier:bundleId.use
      Definition

      この識別子の目的。 / The purpose of this identifier.

      Short通常|公式|一時的|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
      Comments

      アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Observation.identifier:bundleId.system
      Definition

      値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      Short識別子値の名前空間 / The namespace for the identifier value
      Comments

      識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/documentInstance-identifier
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Observation.identifier:bundleId.value
      Definition

      通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      Short一意の値 / The value that is unique
      Comments

      値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Observation.status
      Definition

      結果の状態


      結果値のステータス。 / The status of the result value.

      Short結果の状態登録|予備|ファイナル|修正 + / registered | preliminary | final | amended +
      Comments

      このリソースは現在有効でないというマークをするコードを含んでいるため、この要素はモディファイアー(修飾的要素)として位置づけられている。


      この要素は、リソースを現在有効ではないとマークするコードが含まれているため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

      観察のステータスを提供するコード。 / Codes providing the status of an observation.

      Typecode
      Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      個々の結果のステータスを追跡する必要があります。レポート全体が最終決定される前に、いくつかの結果が確定します。 / Need to track the status of individual results. Some results are finalized before the whole report is finalized.

      Fixed Valuefinal
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Observation.code
      Definition

      Describes what was observed. Sometimes this is called the observation "name".

      検査の内容の説明。検査名称。

      【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/code


      観察されたものについて説明します。時々、これは観察「名前」と呼ばれます。 / Describes what was observed. Sometimes this is called the observation "name".

      ShortこのObservationの対象を特定するコード観察の種類(コード /タイプ) / Type of observation (code / type)
      Comments

      observationの意味を正しく理解するには、すべてのcode-valueペアと、さらに存在する場合にはcomponent.code-component.valueのペアが、考慮される必要がある。


      すべて code-valueおよび存在する場合、component.code-component.valueペアを考慮する必要があります。観察の意味を正しく理解する必要があります。 / All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

      Control1..1
      BindingFor example codes, see LOINCCodeshttp://hl7.org/fhir/ValueSet/observation-codes
      (example to http://hl7.org/fhir/ValueSet/observation-codes)

      単純な観測の名前を識別するコード。 / Codes identifying names of simple observations.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

      Alternate NamesName
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Observation.subject
      Definition

      このObservationの対象となる患者や患者群、機器、場所に関する情報


      患者、または患者のグループ、場所、またはデバイスこの観察結果は、観察が置かれている記録についてであり、その記録にあります。観測の実際の焦点が被験者(または被験者の部分、または領域のサンプル)とは異なる場合、「フォーカス」要素または「コード」自体が観測の実際の焦点を指定します。 / The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

      ShortこのObservationの対象となる患者や患者群、機器、場所に関する情報誰と/または観察が何であるか / Who and/or what the observation is about
      Comments

      この要素は1..1のcardinalityになるはずと考えられる。この要素が欠損値になる唯一の状況は、対象患者が不明なデバイスによって観察が行われるケースである。この場合、観察は何らかのコンテキスト/チャネルマッチング技術を介して患者にマッチングされる必要があり、患者にマッチングされれば、その時点で本要素を更新する必要がある。


      この要素は1..1のカーディナリティになると予想されます。被験者が欠落している唯一の状況は、患者を知らないデバイスによって観察が行われる場合です。この場合、観察は、ある程度のコンテキスト/チャネルマッチング手法を介して患者と一致し、この時点で観察を更新する必要があります。 / One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

      Control10..1
      TypeReference(SEAMAT Common Patient Profile, Patient, Group, Device, Location)
      Is Modifierfalse
      Summarytrue
      Requirements

      あなたが彼らが誰または何をしているのかわからない場合、観察には価値がありません。 / Observations have no value if you don't know who or what they're about.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Observation.value[x]
      Definition

      The information determined as a result of making the observation, if the information has a simple value.

      検体検査の結果として決定された情報。

      【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value


      情報が単純な値を持っている場合、観察結果の結果として決定された情報。 / The information determined as a result of making the observation, if the information has a simple value.

      Short取得された結果実結果 / Actual result
      Comments

      観察にはあります。1)ここでの単一の値、2)関連する値とコンポーネント値のセット、または3)関連またはコンポーネント値のセットのみ。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

      Control0..1
      This element is affected by the following invariants: obs-7
      TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Requirements

      観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Observation.dataAbsentReason
      Definition

      Provides a reason why the expected value in the element Observation.value[x] is missing.

      検査結果値が欠落している理由。

      【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/@nullFlavor


      要素観測値の期待値が欠落している理由を提供します。 / Provides a reason why the expected value in the element Observation.value[x] is missing.

      ShortこのObservationのvalue[x]要素に期待される結果が存在しなかった場合、その理由結果が欠落している理由 / Why the result is missing
      Comments

      ヌル値または例外値は、FHIRオブザベーションで2つの方法で表すことができる。 1つの方法は、それらを値セットに含めて、値の例外を表す方法である。たとえば、血清学的検査の測定値は、「検出された」、「検出されなかった」、「決定的でない」、または「検体が不十分」である可能性がある。別の方法は、実際の観測にvalue要素を使用し、明示的なdataAbsentReason要素を使用して例外的な値を記録することである。たとえば、測定が完了しなかった場合、dataAbsentReasonコード「error」を使用できる。この場合には、観測値は、報告する値がある場合にのみ報告される可能性があることに注意する必要がある。たとえば、差分セルカウント値は> 0の場合にのみ報告される場合がある。これらのオプションのため、nullまたは例外値の一般的な観測値を解釈するにはユースケースの合意が必要である。


      NULLまたは例外的な値は、FHIR観測で2つの方法を表すことができます。1つの方法は、それらを単に値セットに含めるだけで、値の例外を表すことです。たとえば、血清学テストの測定値は、「検出」、「検出されていない」、「決定的でない」、または「標本の不十分」である可能性があります。

      別の方法は、実際の観測に値要素を使用し、明示的なDataBsEntreason要素を使用して例外的な値を記録することです。たとえば、測定が完了していないときに、DataBsentrasonコード「エラー」を使用できます。報告する値がある場合にのみ、観察が報告される可能性があることに注意してください。たとえば、異なるセルカウント値は、> 0の場合にのみ報告される場合があります。これらのオプションのため、ヌルまたは例外的な値の一般的な観測を解釈するには、ユースケース契約が必要です。 / Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

      The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

      Control0..1
      This element is affected by the following invariants: obs-6
      BindingUnless not suitable, these codes SHALL be taken from DataAbsentReasonhttp://hl7.org/fhir/ValueSet/data-absent-reason
      (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

      結果( balue.value [x])が欠落している理由を指定するコード。 / Codes specifying why the result (Observation.value[x]) is missing.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      多くの結果には、測定で例外的な値を処理する必要があります。 / For many results it is necessary to handle exceptional values in measurements.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Observation
      Definition

      SEAMATの測定結果/解析結果の格納に使用する。

      ShortSEAMATの測定結果/解析結果
      Comments

      すべてのObservation(検査測定や観察事実)の共通部分のプロファイル

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Alternate NamesVital Signs, Measurement, Results, Tests
      Invariantsdom-2: リソースが別のリソースに含まれている場合、ネストされたリソースを含めてはなりません / If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: リソースが別のリソースに含まれている場合、それはリソースの他の場所から参照されるか、含有リソースを参照するものとします / If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: リソースが別のリソースに含まれている場合、meta.versionidまたはmeta.lastupdatedを持たないものとします / If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: 別のリソースにリソースが含まれている場合、セキュリティラベルはありません / If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: リソースには、堅牢な管理のための叙述(Narative)が必要です / A resource should have narrative for robust management (text.`div`.exists())
      obs-6: databsentrasonは、観察.value [x]が存在しない場合にのみ存在するものとします / dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
      obs-7: visserveration.codeがvisserveration.component.codeと同じ場合、コードに関連付けられている値要素が存在しないでください / If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
      observation-metaprofile: meta.profileには、指定したプロファイルのURLの記述が存在しなければならない。 (meta.profile.where($this = 'http://jpfhir.jp/fhir/SEAMAT/StructureDefinition/JP_Observation_SEAMAT').exists())
      2. Observation.id
      Definition

      リソースのURLで使用されるリソースの論理ID。割り当てられたら、この値は変更されません。 / The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      Shortこのアーティファクトの論理ID / Logical id of this artifact
      Comments

      リソースにIDがないのは、IDが作成操作を使用してサーバーに送信されている場合です。 / The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Observation.meta
      Definition

      リソースに関するメタデータ。これは、インフラストラクチャによって維持されるコンテンツです。コンテンツの変更は、常にリソースのバージョンの変更に関連付けられているとは限りません。 / The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      Shortリソースに関するメタデータ / Metadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Observation.meta.id
      Definition

      リソース内の要素の固有ID(内部参照用)。これは、スペースを含まない任意の文字列値である可能性があります。

      Shortエレメント相互参照のためのユニークID
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      8. Observation.meta.extension
      Definition

      要素の基本的な定義に含まれない追加情報を表すために使用されることがあります。拡張機能の使用を安全かつ管理しやすくするために、定義および使用に適用される厳格なガバナンスのセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たす必要のある要件のセットがあります。

      Short実装によって定義される追加コンテンツ
      Comments

      どのようなアプリケーション、プロジェクト、または標準が拡張機能を使用しているかに関わらず、拡張機能の使用には決して汚名が付くわけではありません - それらを使用または定義する機関または管轄区域に関係なく。拡張機能の使用こそが、FHIR仕様を誰にとっても簡単なコアレベルで維持することを可能にします。

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
      ext-1: 拡張機能または値[x]のいずれかが必要です。両方ではありません。 (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Observation.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 10. Observation.meta.versionId
        Definition

        URLのバージョン部分に表示されるバージョン固有の識別子。この値は、リソースが作成、更新、または削除された場合に変更されます。

        Shortバージョン固有の識別子 (Baajon koyū no shikibetsu-shi)
        Comments

        サーバーがこの値を割り当て、クライアントが指定した値を無視する。ただし、サーバーが更新/削除時にバージョンの整合性を強制する場合を除く。

        Control0..1
        Typeid
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        12. Observation.meta.lastUpdated
        Definition

        リソースが最後に変更されたとき - 例えば、バージョンが変更されたとき。

        Shortリソースのバージョンが最後に変更されたとき
        Comments

        この値はリソースが初めて作成される場合を除いて常に設定されています。サーバー/リソースマネージャーがこの値を設定します。クライアントが提供する値は関係ありません。これはHTTP Last-Modifiedに相当し、readのインタラクションで同じ値を持つべきです。

        Control1..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        14. Observation.meta.source
        Definition

        リソースのソースシステムを識別するURI。これにより、リソース内の情報のソースをトラックまたは区別するために使用できる最小限の[プロビナンス](provenance.html#)情報が提供されます。ソースは、別のFHIRサーバー、ドキュメント、メッセージ、データベースなどを識別できます。

        Short「リソースがどこから来たかを特定する」
        Comments

        プロバナンスのリソースにおいて、これはProvenance.entity.what[x]に対応します。ソースの正確な使用方法(および含意されるProvenance.entity.role)は実装者の判断に委ねられます。指定されたソースは1つだけです。追加のプロバナンスの詳細が必要な場合は、完全なプロバナンスリソースを使用するべきです。

        この要素は、正規のURLでホストされていないリソースの現在のマスターソースがどこにあるかを示すために使用できます。

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        16. Observation.meta.profile
        Definition

        このリソースが準拠すると主張する StructureDefinition リソースに関するプロファイルのリストです。URL は StructureDefinition.url への参照です。

        Shortこのリソースが適合を主張するプロファイル
        Comments

        これらの主張が時間の経過に伴って検証または更新される方法と、それらを決定するサーバーや他の基盤に任されます。プロファイルURLのリストは1セットです。

        Control1..*
        Typecanonical(StructureDefinition)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        18. Observation.meta.security
        Definition

        このリソースにはセキュリティラベルが適用されています。これらのタグにより、特定のリソースが全体的なセキュリティポリシーやインフラストラクチャに関連付けられます。

        Shortこのリソースに適用されたセキュリティラベル
        Comments

        セキュリティラベルは変更せずにリソースのバージョンを更新可能です。セキュリティラベルのリストはセットであり、一意性はシステム/コードに基づき、バージョンと表示は無視されます。

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels)

        医療プライバシーおよびセキュリティ分類システムからのセキュリティラベル。

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        20. Observation.meta.tag
        Definition

        このリソースに適用されるタグです。タグは、リソースをプロセスやワークフローに識別し、関連付けるために使用することが意図されており、アプリケーションはリソースの意味を解釈する際にタグを考慮する必要はありません。

        Shortこのリソースに適用されたタグ
        Comments

        リソースの表示バージョンを変更することなく、タグを更新できます。タグのリストは集合です。ユニーク性はシステム/コードに基づき、バージョンと表示は無視されます。

        Control0..*
        BindingFor example codes, see CommonTags
        (example to http://hl7.org/fhir/ValueSet/common-tags)

        様々なタグを表すコードで、一般的にはワークフローに関連しています。例:「ジョーンズ博士によるレビューが必要です」。

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: すべてのFHIR要素は、@valueまたはchildrenを持っている必要があります。 (hasValue() or (children().count() > id.count()))
        22. Observation.implicitRules
        Definition

        リソースが構築されたときに従った一連のルールへの参照。コンテンツの処理時に理解する必要があります。多くの場合、これは他のプロファイルなどとともに特別なルールを定義する実装ガイドへの参照です。 / A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        Shortこのコンテンツが作成されたルールのセット / A set of rules under which this content was created
        Comments

        このルールセットを主張することは、コンテンツが限られた取引パートナーのセットによってのみ理解されることを制限します。これにより、本質的に長期的にデータの有用性が制限されます。ただし、既存の健康エコシステムは非常に破壊されており、一般的に計算可能な意味でデータを定義、収集、交換する準備ができていません。可能な限り、実装者や仕様ライターはこの要素の使用を避ける必要があります。多くの場合、使用する場合、URLは、これらの特別なルールを他のプロファイル、バリューセットなどとともに叙述(Narative)の一部として定義する実装ガイドへの参照です。 / Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because 暗黙のルールは、意味または解釈を変更するリソースに関する追加の知識を提供する可能性があるため、この要素は修飾子としてラベル付けされています。 / This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Observation.language
        Definition

        リソースが書かれている基本言語。 / The base language in which the resource is written.

        Shortリソースコンテンツの言語 / Language of the resource content
        Comments

        言語は、インデックス作成とアクセシビリティをサポートするために提供されます(通常、テキストから音声までのサービスなどのサービスが言語タグを使用します)。叙述(Narative)のHTML言語タグは、叙述(Narative)に適用されます。リソース上の言語タグを使用して、リソース内のデータから生成された他のプレゼンテーションの言語を指定できます。すべてのコンテンツが基本言語である必要はありません。リソース。言語は、叙述(Narative)に自動的に適用されると想定されるべきではありません。言語が指定されている場合、HTMLのDIV要素にも指定されている場合(XML:LangとHTML Lang属性の関係については、HTML5のルールを参照してください)。 / Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        人間の言語。 / A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Observation.text
        Definition

        リソースの概要を含み、人間へのリソースの内容を表すために使用できる人間の読み取り可能な叙述(Narative)。叙述(Narative)はすべての構造化されたデータをエンコードする必要はありませんが、人間が叙述(Narative)を読むだけで「臨床的に安全」にするために十分な詳細を含める必要があります。リソースの定義は、臨床的安全を確保するために、叙述(Narative)で表現するコンテンツを定義する場合があります。 / A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        Short人間の解釈のためのリソースのテキスト概要 / Text summary of the resource, for human interpretation
        Comments

        含まれるリソースには叙述(Narative)がありません。含まれていないリソースには叙述(Narative)が必要です。場合によっては、リソースには、追加の個別のデータがほとんどまたはまったくないテキストのみがあります(すべてのMinoccur = 1要素が満たされている限り)。これは、情報がtext blob (バイナリー ラージ オブジェクト)としてキャプチャされるレガシーシステムからのデータ、またはテキストが生またはナレーションされ、エンコードされた情報が後で追加される場合に必要になる場合があります。 / Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Observation.contained
        Definition

        これらのリソースには、それらを含むリソースを除いて独立した存在はありません - 独立して特定することはできず、独自の独立したトランザクションスコープを持つこともできません。 / These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        Shortインラインリソースが含まれています / Contained, inline Resources
        Comments

        識別が失われると、コンテンツを適切に識別できる場合は、これを行うべきではありません。含まれるリソースには、メタ要素にプロファイルとタグがある場合がありますが、セキュリティラベルはありません。 / This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        30. Observation.extension
        Definition

        リソースの基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        Short実装で定義された追加のコンテンツ / Additional content defined by implementations
        Comments

        拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Observation.modifierExtension
        Definition

        リソースの基本的な定義の一部ではなく、それを含む要素の理解および/または含有要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義することが許可されていますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

        モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        Short無視できない拡張機能 / Extensions that cannot be ignored
        Comments

        拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because モディファイア拡張は、それらを含むリソースの意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Observation.identifier
        Definition

        このObservationリソースの一意な識別ID

        ShortこのObservationリソースの一意な識別ID
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Observation.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ system
        • 36. Observation.identifier:resourceId
          Slice NameresourceId
          Definition

          Unique instance identifiers assigned to a device by manufacturers other organizations or owners.

          ShortこのObservationリソースの一意な識別ID
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Observation.identifier:resourceId.id
          Definition

          リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          Short要素間参照のための一意のID / Unique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          40. Observation.identifier:resourceId.extension
          Definition

          要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          Short実装で定義された追加のコンテンツ / Additional content defined by implementations
          Comments

          拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Observation.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 42. Observation.identifier:resourceId.use
            Definition

            この識別子の目的。 / The purpose of this identifier.

            Short通常|公式|一時的|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
            Comments

            アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

            Control0..1
            BindingThe codes SHALL be taken from IdentifierUse
            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

            既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

            Typecode
            Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Observation.identifier:resourceId.type
            Definition

            特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

            Short識別子の説明 / Description of identifier
            Comments

            この要素は、識別子の一般的なカテゴリのみを扱います。識別子。システムに対応するコードに使用しないでください。一部の識別子は、一般的な使用法により複数のカテゴリに分類される場合があります。システムがわかっている場合、タイプは常にシステム定義の一部であるため、タイプは不要です。ただし、システムが不明な識別子を処理する必要があることがよくあります。多くの異なるシステムが同じタイプを持っているため、タイプとシステムの間に1:1の関係はありません。 / This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

            特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            識別子システムが不明な場合、ユーザーは識別子を使用できます。 / Allows users to make use of identifiers when the identifier system is not known.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Observation.identifier:resourceId.system
            Definition

            値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

            Short識別子値の名前空間 / The namespace for the identifier value
            Comments

            識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

            Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/resourceInstance-identifier
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. Observation.identifier:resourceId.value
            Definition

            通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

            Short一意の値 / The value that is unique
            Comments

            値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Observation.identifier:resourceId.period
            Definition

            識別子が使用される/有効な期間。 / Time period during which identifier is/was valid for use.

            ShortIDが使用に有効だった時間期間 / Time period when id is/was valid for use
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Observation.identifier:resourceId.assigner
            Definition

            識別子を発行/管理する組織。 / Organization that issued/manages the identifier.

            ShortIDを発行した組織(単なるテキストである可能性があります) / Organization that issued id (may be just text)
            Comments

            識別子は、.reference要素を省略し、割り当て組織に関する名前またはその他のテキスト情報を反映した.display要素のみを含む場合があります。 / The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Observation.identifier:bundleId
            Slice NamebundleId
            Definition

            文書Bundleの固定識別番号。Bundle.identifier と同じ値を指定する。

            Short文書Bundleの固定識別番号。
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..1
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            観測を区別し、参照することを可能にします。 / Allows observations to be distinguished and referenced.

            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Observation.identifier:bundleId.id
            Definition

            リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            Short要素間参照のための一意のID / Unique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            58. Observation.identifier:bundleId.extension
            Definition

            要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            Short実装で定義された追加のコンテンツ / Additional content defined by implementations
            Comments

            拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Observation.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 60. Observation.identifier:bundleId.use
              Definition

              この識別子の目的。 / The purpose of this identifier.

              Short通常|公式|一時的|セカンダリ|古い(知られている場合) / usual | official | temp | secondary | old (If known)
              Comments

              アプリケーションは、識別子が一時的なものであると明示的に言っていない限り、永続的であると想定できます。 / Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

              既知の場合、この識別子の目的を識別します。 / Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because これは、アプリケーションが一時的なIDを永続的なIDと間違えてはならないため、「IS修飾子」とラベル付けされています。 / This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              特定の使用のコンテキストが一連の識別子の中から選択される適切な識別子を許可します。 / Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Observation.identifier:bundleId.type
              Definition

              特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              Short識別子の説明 / Description of identifier
              Comments

              この要素は、識別子の一般的なカテゴリのみを扱います。識別子。システムに対応するコードに使用しないでください。一部の識別子は、一般的な使用法により複数のカテゴリに分類される場合があります。システムがわかっている場合、タイプは常にシステム定義の一部であるため、タイプは不要です。ただし、システムが不明な識別子を処理する必要があることがよくあります。多くの異なるシステムが同じタイプを持っているため、タイプとシステムの間に1:1の関係はありません。 / This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              特定の目的に使用する識別子を決定するために使用できる識別子のコード化されたタイプ。 / A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              識別子システムが不明な場合、ユーザーは識別子を使用できます。 / Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Observation.identifier:bundleId.system
              Definition

              値の名前空間、つまり一意のセット値を記述するURLを確立します。 / Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

              Short識別子値の名前空間 / The namespace for the identifier value
              Comments

              識別子。システムは常にケースに敏感です。 / Identifier.system is always case sensitive.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              識別子のセットがたくさんあります。2つの識別子を一致させるには、どのセットを扱っているかを知る必要があります。システムは、特定の一意の識別子セットを識別します。 / There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Fixed Valuehttp://jpfhir.jp/fhir/core/IdSystem/documentInstance-identifier
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Observation.identifier:bundleId.value
              Definition

              通常、識別子の部分はユーザーに関連し、システムのコンテキスト内で一意のユーザーに関連しています。 / The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              Short一意の値 / The value that is unique
              Comments

              値が完全なURIの場合、システムはurn:ietf:rfc:3986でなければなりません。値の主な目的は、計算マッピングです。その結果、比較目的で正規化される可能性があります(例えば、有意でない白文字、ダッシュなどの削除)ヒューマンディスプレイ用の値は、[レンダリングされた値拡張](拡張レンダリングValue.html)を使用して伝達できます。識別子。価値は、識別子の知識を使用しない限り、ケースに敏感なものとして扱われます。システムにより、プロセッサーは、非セイズに固有の処理が安全であると確信できます。 / If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Observation.identifier:bundleId.period
              Definition

              識別子が使用される/有効な期間。 / Time period during which identifier is/was valid for use.

              ShortIDが使用に有効だった時間期間 / Time period when id is/was valid for use
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Observation.identifier:bundleId.assigner
              Definition

              識別子を発行/管理する組織。 / Organization that issued/manages the identifier.

              ShortIDを発行した組織(単なるテキストである可能性があります) / Organization that issued id (may be just text)
              Comments

              識別子は、.reference要素を省略し、割り当て組織に関する名前またはその他のテキスト情報を反映した.display要素のみを含む場合があります。 / The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Observation.basedOn
              Definition

              このObservationが実施されることになった依頼や計画、提案に関する情報

              ShortこのObservationが実施されることになった依頼や計画、提案に関する情報
              Control0..*
              TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, JP Core MedicationRequest Profile, JP Core MedicationRequest Injection Profile, NutritionOrder, ServiceRequest)
              Is Modifierfalse
              Summarytrue
              Requirements

              イベントの許可を追跡し、提案/勧告が行われたかどうかを追跡することができます。 / Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

              Alternate NamesFulfills
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Observation.partOf
              Definition

              このObservationが親イベントの一部を成す要素であるとき、その親イベントに関する情報

              ShortこのObservationが親イベントの一部を成す要素であるとき、その親イベントに関する情報
              Comments

              ObservationをEncounterにencounter要素を使ってリンクする。もうひとつ別のObservationを参照することについては、以降にあるt Notes をガイダンスとして参照のこと。

              Control0..*
              TypeReference(JP Core MedicationAdministration Profile, JP Core MedicationAdministration Injection Profile, JP Core MedicationDispenseBase Profile, MedicationStatement, JP Core Procedure Profile, JP Core Immunization Profile, ImagingStudy)
              Is Modifierfalse
              Summarytrue
              Alternate NamesContainer
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Observation.status
              Definition

              結果の状態

              Short結果の状態
              Comments

              このリソースは現在有効でないというマークをするコードを含んでいるため、この要素はモディファイアー(修飾的要素)として位置づけられている。

              Control1..1
              BindingThe codes SHALL be taken from ObservationStatus
              (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

              観察のステータスを提供するコード。 / Codes providing the status of an observation.

              Typecode
              Is Modifiertrue because この要素は、リソースを有効として扱うべきではないことを意味するステータスに入力されたステータスを含むステータス要素であるため、修飾子としてラベル付けされています。 / This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              個々の結果のステータスを追跡する必要があります。レポート全体が最終決定される前に、いくつかの結果が確定します。 / Need to track the status of individual results. Some results are finalized before the whole report is finalized.

              Fixed Valuefinal
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Observation.category
              Definition

              このObservationを分類するコード

              ShortこのObservationを分類するコード
              Comments

              階層的にカテゴリーを設定することで粒度のレベルを概念定義できる。

              Control0..*
              BindingThe codes SHOULD be taken from JP Core Simple Observation Category ValueSet
              (preferred to http://jpfhir.jp/fhir/core/ValueSet/JP_SimpleObservationCategory_VS)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              どの観測値が取得されて表示されるかをフィルタリングするために使用されます。 / Used for filtering what observations are retrieved and displayed.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Observation.code
              Definition

              Describes what was observed. Sometimes this is called the observation "name".

              検査の内容の説明。検査名称。

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/code

              ShortこのObservationの対象を特定するコード
              Comments

              observationの意味を正しく理解するには、すべてのcode-valueペアと、さらに存在する場合にはcomponent.code-component.valueのペアが、考慮される必要がある。

              Control1..1
              BindingFor example codes, see LOINCCodes
              (example to http://hl7.org/fhir/ValueSet/observation-codes)

              単純な観測の名前を識別するコード。 / Codes identifying names of simple observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

              Alternate NamesName
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              82. Observation.subject
              Definition

              このObservationの対象となる患者や患者群、機器、場所に関する情報

              ShortこのObservationの対象となる患者や患者群、機器、場所に関する情報
              Comments

              この要素は1..1のcardinalityになるはずと考えられる。この要素が欠損値になる唯一の状況は、対象患者が不明なデバイスによって観察が行われるケースである。この場合、観察は何らかのコンテキスト/チャネルマッチング技術を介して患者にマッチングされる必要があり、患者にマッチングされれば、その時点で本要素を更新する必要がある。

              Control1..1
              TypeReference(SEAMAT Common Patient Profile)
              Is Modifierfalse
              Summarytrue
              Requirements

              あなたが彼らが誰または何をしているのかわからない場合、観察には価値がありません。 / Observations have no value if you don't know who or what they're about.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. Observation.focus
              Definition

              配偶者、親、胎児、ドナーなど、このObservationのsubject要素が実際の対象でない場合、その実際の対象に関する情報

              Short配偶者、親、胎児、ドナーなど、このObservationのsubject要素が実際の対象でない場合、その実際の対象に関する情報
              Comments

              T通常、observationは対象(患者、または患者のグループ、場所、またはデバイス)について行われ、対象とobservationのために直接測定されるものとの区別は、observationコード自体(例:「血糖値」 )で記述され、この要素を使用して個別に表す必要はない。検体(標本)への参照が必要な場合は、 specimen要素を使用する。リソースの代わりにコードが必要な場合は、人体部位にはbodysite要素を使用するか、標準の拡張機能[focusCode](extension-observation-focuscode.html)を使用する。

              Control0..*
              TypeReference(Resource)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. Observation.encounter
              Definition

              診察や入院など、このObservationが実施されるきっかけとなった診療イベントに関する情報

              Short診察や入院など、このObservationが実施されるきっかけとなった診療イベントに関する情報
              Comments

              通常、イベントが発生したEncounterであるが、一部のイベントは、Encounterの正式な完了の前または後に開始される場合があり、その場合でもEncounterのコンテキストに関連付けられている(例:入院前の臨床検査)。

              Control0..1
              TypeReference(JP Core Encounter Profile)
              Is Modifierfalse
              Summarytrue
              Requirements

              一部の観察では、観察と特定のEncounterの間のリンクを知ることが重要かもしれません。 / For some observations it may be important to know the link between an observation and a particular encounter.

              Alternate NamesContext
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. Observation.effective[x]
              Definition

              取得された結果が臨床的に確定された日時または期間

              Short取得された結果が臨床的に確定された日時または期間
              Comments

              この観察結果が過去の報告でない限り、少なくとも日付が存在する必要がある。不正確または「あいまいな」時間を記録するには(たとえば、「朝食後」に行われた血糖測定)、[Timing](datatypes.html#timing)データ型を使用して、測定を通常のライフイベントに関連付けることができる。

              Control0..1
              TypeChoice of: dateTime, Period, Timing, instant
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              観察が真実と見なされた時期を知ることは、その関連性にとって重要であり、傾向を決定します。 / Knowing when an observation was deemed true is important to its relevance as well as determining trends.

              Alternate NamesOccurrence
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. Observation.issued
              Definition

              このバージョンのObservationが医療者に提供された日時。通常、結果を確認し検証後に提供される日時

              ShortこのバージョンのObservationが医療者に提供された日時。通常、結果を確認し検証後に提供される日時
              Comments

              レビューと検証を必要としないobservationの場合、リソース自体の[lastUpdated](resource-definitions.html#Meta.lastUpdated)日時と同じになる場合がある。特定の更新のレビューと検証が必要なobservationの場合、新しいバージョンを再度レビューして検証する必要がないような臨床的に重要でない更新がなされたために、リソース自体の「lastUpdated」時間はこれと異なる場合がある。

              Control0..1
              Typeinstant
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Observation.performer
              Definition

              このObservationの責任者/実施者に関する情報

              ShortこのObservationの責任者/実施者に関する情報
              Comments

              参照は、実際のFHIRリソースへの参照である必要があり、解決可能(内容に到達可能)である必要がある(アクセス制御、一時的な使用不可などを考慮に入れる)。解決は、URLから取得するか、リソースタイプによって該当する場合は、絶対参照を正規URLとして扱い、ローカルレジストリ/リポジトリで検索することによって行うことができる。

              Control0..*
              TypeReference(JP Core Practitioner Profile, JP Core PractitionerRole Profile, JP Core Organization Profile, CareTeam, JP Core Patient Profile, RelatedPerson)
              Is Modifierfalse
              Summarytrue
              Requirements

              観察にある程度の自信を与える可能性があり、また、フォローアップの質問をどこに向けるべきかを示します。 / May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Observation.value[x]
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              検体検査の結果として決定された情報。

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value

              Short取得された結果
              Comments

              観察にはあります。1)ここでの単一の値、2)関連する値とコンポーネント値のセット、または3)関連またはコンポーネント値のセットのみ。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              This element is affected by the following invariants: obs-7
              TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summarytrue
              Requirements

              観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Observation.dataAbsentReason
              Definition

              Provides a reason why the expected value in the element Observation.value[x] is missing.

              検査結果値が欠落している理由。

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/@nullFlavor

              ShortこのObservationのvalue[x]要素に期待される結果が存在しなかった場合、その理由
              Comments

              ヌル値または例外値は、FHIRオブザベーションで2つの方法で表すことができる。 1つの方法は、それらを値セットに含めて、値の例外を表す方法である。たとえば、血清学的検査の測定値は、「検出された」、「検出されなかった」、「決定的でない」、または「検体が不十分」である可能性がある。別の方法は、実際の観測にvalue要素を使用し、明示的なdataAbsentReason要素を使用して例外的な値を記録することである。たとえば、測定が完了しなかった場合、dataAbsentReasonコード「error」を使用できる。この場合には、観測値は、報告する値がある場合にのみ報告される可能性があることに注意する必要がある。たとえば、差分セルカウント値は> 0の場合にのみ報告される場合がある。これらのオプションのため、nullまたは例外値の一般的な観測値を解釈するにはユースケースの合意が必要である。

              Control0..1
              This element is affected by the following invariants: obs-6
              BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
              (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

              結果( balue.value [x])が欠落している理由を指定するコード。 / Codes specifying why the result (Observation.value[x]) is missing.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              多くの結果には、測定で例外的な値を処理する必要があります。 / For many results it is necessary to handle exceptional values in measurements.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. Observation.interpretation
              Definition

              高、低、正常等の結果のカテゴリ分けした評価

              Short高、低、正常等の結果のカテゴリ分けした評価
              Comments

              「異常フラグ」として呼ばれる検査結果解釈コードが従来から使用されており、その使用はコード化された解釈が関連するような他の場合でも拡大して使われている。多くの場合、1つ以上の単純でコンパクトなコードとして報告され、この要素は、結果の意味や正常かどうかを示すために、レポートや時系列表で結果値の隣に配置されることがよくある。

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
              (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

              観測の解釈を識別するコード。 / Codes identifying interpretations of observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              一部の結果、特に数値結果については、結果の意義を完全に理解するためには解釈コードが必要である。

              Alternate NamesAbnormal Flag
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Observation.note
              Definition

              このObservationに関するコメント

              ShortこのObservationに関するコメント
              Comments

              観察(結果)に関する一般的な記述、重要な、予期しない、または信頼できない結果値に関する記述、またはその解釈に関連する場合はそのソースに関する情報が含まれる場合がある。

              Control0..*
              TypeAnnotation
              Is Modifierfalse
              Summaryfalse
              Requirements

              Need to be able to provide free text additional information.
              フリーテキストの追加情報を提供できる必要がある。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Observation.bodySite
              Definition

              対象となった身体部位

              Short対象となった身体部位
              Comments

              観察結果で見つかったコードで暗黙的ではない場合にのみ使用されます。多くのシステムでは、これはインラインコンポーネントの代わりに関連する観察として表される場合があります。

              ユースケースでは、ボディサイトを個別のリソースとして処理する必要がある場合(たとえば、個別に識別および追跡するため)、標準の拡張[BodySite](Extension-BodySite.html)を使用します。 / Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

              If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

              Control0..1
              BindingFor example codes, see SNOMEDCTBodyStructures
              (example to http://hl7.org/fhir/ValueSet/body-site)

              解剖学的場所を説明するコード。左右性が含まれる場合があります。 / Codes describing anatomical locations. May include laterality.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Observation.method
              Definition

              このObservationの実施方法

              ShortこのObservationの実施方法
              Comments

              CODERATION.CODEのコードに暗黙的ではない場合にのみ使用されます。 / Only used if not implicit in code for Observation.code.

              Control0..1
              BindingFor example codes, see ObservationMethods
              (example to http://hl7.org/fhir/ValueSet/observation-methods)

              単純な観測の方法。 / Methods for simple observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              場合によっては、メソッドは結果に影響を与える可能性があるため、結果を比較できるか、結果の重要性を決定できるかどうかを判断するために使用されます。 / In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Observation.specimen
              Definition

              このObservationに使われた検体/標本に関する情報

              ShortこのObservationに使われた検体/標本に関する情報
              Comments

              Observation.codeにあるコードで暗黙的に示されない場合にのみ使用する必要がある。検体自体の観察は行われない。観察(観測、検査)対象者に対して実施されるが、多くの場合には対象者から得られた検体に対して実施される。検体が奥の場合に関わるが、それらは常に追跡され、明示的に報告されるとは限らないことに注意すること。またobservationリソースは、検体を明示的に記述するような状況下(診断レポートなど)で使用される場合があることに注意。

              Control0..1
              TypeReference(Specimen)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              108. Observation.device
              Definition

              このObservationでデータを得るために使われた測定機器に関する情報

              ShortこのObservationでデータを得るために使われた測定機器に関する情報
              Comments

              これは、結果の送信に関与するデバイス(ゲートウェイなど)を表すことを意図したものではない。そのようなデバイスは、必要に応じてProvenanceリソースを使用して文書化する。

              Control0..1
              TypeReference(Device, DeviceMetric)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              110. Observation.referenceRange
              Definition

              基準範囲との比較による結果の解釈方法のガイダンス

              Short基準範囲との比較による結果の解釈方法のガイダンス
              Comments

              通常の範囲または推奨範囲と比較して値を解釈する方法に関するガイダンス。複数の参照範囲は「OR」として解釈される。つまり、2つの異なるターゲット母集団を表すために、2つの referenceRange要素が使用される。

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Requirements

              どの値が「正常」と見なされるかを知ることは、特定の結果の意義を評価するのに役立つ。さまざまなコンテキストに対応するため複数の参照範囲を提供できる必要がある。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              obs-3: 少なくとも低いまたは高またはテキストが必要です / Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
              112. Observation.referenceRange.id
              Definition

              リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Short要素間参照のための一意のID / Unique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              114. Observation.referenceRange.extension
              Definition

              要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              Short実装で定義された追加のコンテンツ / Additional content defined by implementations
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              116. Observation.referenceRange.modifierExtension
              Definition

              要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

              モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              118. Observation.referenceRange.low
              Definition

              参照範囲の低境界の値。参照範囲のエンドポイントの低い境界には、値が含まれています(例:参照範囲は> = 5- <= 9)。下限が省略されている場合、それは意味がないと想定されます(例:参照範囲は<= 2.3)。 / The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

              Short関連する場合は低レンジ / Low Range, if relevant
              Control0..1
              This element is affected by the following invariants: obs-3
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              120. Observation.referenceRange.high
              Definition

              参照範囲の強境界の値。参照範囲のエンドポイントの高境界には、値が含まれています(例:参照範囲は> = 5- <= 9)。高バウンドが省略されている場合、それは無意味であると想定されます(例:参照範囲は> = 2.3)。 / The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

              Short関連する場合、高レンジ / High Range, if relevant
              Control0..1
              This element is affected by the following invariants: obs-3
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              122. Observation.referenceRange.type
              Definition

              適用されるターゲット参照母集団のどの部分を示すコード。たとえば、通常または治療範囲。 / Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

              Short参照範囲予選 / Reference range qualifier
              Comments

              複数の範囲がある場合は、これに浸透する必要があります。この要素が存在しない場合、通常の範囲が想定されます。 / This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

              Control0..1
              BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
              (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning)

              参照範囲の意味のコード。 / Code for the meaning of a reference range.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              適切な解釈のために、これが正常、推奨、治療など、どのような参照範囲を言うことができる必要があります。 / Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              124. Observation.referenceRange.appliesTo
              Definition

              この参照範囲が適用される対象母集団を示すコード。たとえば、参照範囲は、通常の集団または特定の性別または人種に基づいている場合があります。複数の「Applesto」は、ターゲット集団の「および」として解釈されます。たとえば、アフリカ系アメリカ人の女性の対象集団を代表するために、女性のコードとアフリカ系アメリカ人のコードの両方が使用されます。 / Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

              Short参照範囲の母集団 / Reference range population
              Comments

              複数の範囲がある場合は、これに浸透する必要があります。この要素が存在しない場合、通常の母集団が想定されます。 / This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

              Control0..*
              BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
              (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto)

              参照範囲が適用される母集団を識別するコード。 / Codes identifying the population the reference range applies to.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              適切な解釈のためにターゲット母集団を特定できる必要があります。 / Need to be able to identify the target population for proper interpretation.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              126. Observation.referenceRange.age
              Definition

              この参照範囲が適用される年齢。意味がそう言っている場合、これは新生児の年齢(期間の週数)です。 / The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

              Short適用される年齢範囲、関連する場合 / Applicable age range, if relevant
              Control0..1
              TypeRange
              Is Modifierfalse
              Summaryfalse
              Requirements

              一部の分析物は、年齢によって大きく異なります。 / Some analytes vary greatly over age.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              128. Observation.referenceRange.text
              Definition

              テキストベースの参照範囲の観測では、定量的範囲が観測に適していない場合に使用される場合があります。例は、「ネガティブ」の参照値、または「通常」のリストまたはテーブルです。 / Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

              Short観察中のテキストベースの参照範囲 / Text based reference range in an observation
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              130. Observation.hasMember
              Definition

              このObservationに関連する子リソースに関する情報。このObservationに関連する/属するパネル検査や検査セットなどのObservationグループ

              ShortこのObservationに関連する子リソースに関する情報。このObservationに関連する/属するパネル検査や検査セットなどのObservationグループ
              Comments

              この要素を使用する場合、observationには通常、値または関連するリソースのセットのいじれかを含む。その両方を含む場合もある。複数のobservationをグループに一緒にまとめる方法については、以下の[メモ](observation.html#obsgrouping)を参照せよ。システムは、[QuestionnaireResponse](questionnaireresponse.html)からの結果を計算して最終スコアにし、そのスコアをobservationとして表す場合があることに注意。

              Control0..*
              TypeReference(JP Core Observation Common Profile, QuestionnaireResponse, MolecularSequence)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              132. Observation.derivedFrom
              Definition

              このObservationの結果の導出元に関する情報。例えば、画像検査から取得された結果となる場合その導出元となる画像検査結果を示すImagingStudyリソース

              ShortこのObservationの結果の導出元に関する情報。例えば、画像検査から取得された結果となる場合その導出元となる画像検査結果を示すImagingStudyリソース
              Comments

              この要素にリストされているすべての参照の選択肢は、派生値の元のデータなる可能性のある臨床観察やその他の測定値を表すことができる。最も一般的な参照先は、別のobservationである。observationをグループに一緒にまとめる方法については、以下の[メモ](observation.html#obsgrouping)を参照すること。

              Control0..*
              TypeReference(DocumentReference, ImagingStudy, Media, QuestionnaireResponse, JP Core Observation Common Profile, MolecularSequence)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              134. Observation.component
              Definition

              複合的な結果。例えば、血圧測定値ではそれを構成する収縮期および拡張期の値の組み合わせ

              Short複合的な結果。例えば、血圧測定値ではそれを構成する収縮期および拡張期の値の組み合わせ
              Comments

              複数のObservation をグループに一緒にまとめる方法については、以下の[Notes](observation.html#notes)を参照すること。

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Requirements

              コンポーネントobservation は プライマリobservation としてのobservation リソースの中で同じ属性を共有し、常に単一のobservation の一部として扱われる(つまりそれらは分離可能ではないん)。ただし、プライマリobservationのreference rangeはコンポーネント値に継承されないため、reference rangeは各コンポーネントobservation に適切であれば必要である。

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              136. Observation.component.id
              Definition

              リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              Short要素間参照のための一意のID / Unique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              138. Observation.component.extension
              Definition

              要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              Short実装で定義された追加のコンテンツ / Additional content defined by implementations
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              140. Observation.component.modifierExtension
              Definition

              要素の基本的な定義の一部ではなく、それが含まれている要素の理解、および/または含まれる要素の子孫の理解を変更するために使用される場合があります。通常、修飾子要素は否定または資格を提供します。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。アプリケーションの処理リソースは、修飾子拡張機能をチェックする必要があります。

              モディファイア拡張は、リソースまたはdomainResource上の要素の意味を変更してはなりません(修飾軸自体の意味を変更することはできません)。 / May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              Short認識されていなくても無視できない拡張機能 / Extensions that cannot be ignored even if unrecognized
              Comments

              拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because 修飾子拡張は、それらを含む要素の意味または解釈を変更することが期待されています / Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              修飾子拡張機能により、安全に無視できる大部分の拡張機能と明確に区別できるように、安全に無視できない拡張機能が可能になります。これにより、実装者が拡張の存在を禁止する必要性を排除することにより、相互運用性が促進されます。詳細については、[修飾子拡張の定義](拡張性.html#modifierextension)を参照してください。 / Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
              142. Observation.component.code
              Definition

              Describes what was observed. Sometimes this is called the observation "code".

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/code

              Shortコンポーネント観測の種類(コード /タイプ) / Type of component observation (code / type)
              Comments

              すべて code-valueおよびcomponent.code-component.valueペアを考慮する必要があります。観察の意味を正しく理解する必要があります。 / All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

              Control1..1
              BindingFor example codes, see LOINCCodes
              (example to http://hl7.org/fhir/ValueSet/observation-codes)

              単純な観測の名前を識別するコード。 / Codes identifying names of simple observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              どのような観察が行われているかを知ることは、観察を理解するために不可欠です。 / Knowing what kind of observation is being made is essential to understanding the observation.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              144. Observation.component.value[x]
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/value

              Short実際のコンポーネントの結果 / Actual component result
              Comments

              観察には一連のコンポーネント観測がある場合に使用されます。観察には、値(APGARスコアなど)とコンポーネントの観測(APGARスコアが導き出された観測)の両方があります。値が存在する場合、この要素のデータ型は、viscervation.codeによって決定する必要があります。フィールドが通常コーディングされている場合、または観測に関連付けられたタイプの場合、文字列の代わりにテキストのみを持つCodeableconecteが使用されます。コードはコード化された値を定義します。追加のガイダンスについては、以下の[[メモ]セクション]([観察.html#注)を参照してください。 / Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              観測は値を持つように存在しますが、それが誤っている場合、または観測のグループを表す場合はそうではありません。 / An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              146. Observation.component.dataAbsentReason
              Definition

              Provides a reason why the expected value in the element Observation.component.value[x] is missing.

              【CDA項目】/ClinicalDocument/component/structuredBody/component/section/entry/observation/value/entryRelationship/observation/value/@nullFlavor

              Shortコンポーネントの結果が欠落している理由 / Why the component result is missing
              Comments

              「null」または例外的な値は、FHIR観測で2つの方法を表すことができます。1つの方法は、それらを単に値セットに含めるだけで、値の例外を表すことです。たとえば、血清学テストの測定値は、「検出」、「検出されない」、「決定的でない」、または「テストなし」です。

              別の方法は、実際の観測に値要素を使用し、明示的なDataBsEntreason要素を使用して例外的な値を記録することです。たとえば、測定が完了していないときに、DataBsentrasonコード「エラー」を使用できます。これらのオプションのため、一般的な観測を例外的な価値のために解釈するには、ユースケース契約が必要です。 / "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

              The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

              Control0..1
              This element is affected by the following invariants: obs-6
              BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
              (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

              結果( balue.value [x])が欠落している理由を指定するコード。 / Codes specifying why the result (Observation.value[x]) is missing.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              多くの結果には、測定で例外的な値を処理する必要があります。 / For many results it is necessary to handle exceptional values in measurements.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              148. Observation.component.interpretation
              Definition

              観測値のカテゴリー評価。たとえば、高、低、正常。 / A categorical assessment of an observation value. For example, high, low, normal.

              Short高、低、正常など。 / High, low, normal, etc.
              Comments

              歴史的に実験室の結果(「異常なフラグ」と呼ばれる)に使用されていたため、その使用は、コード化された解釈が関連する他のユースケースにまで及びます。多くの場合、1つ以上の単純なコンパクトコードとして報告されているこの要素は、結果の意味/正常性のステータスを示すレポートとフローシートの結果値に隣接することがよくあります。 / Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
              (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

              観測の解釈を識別するコード。 / Codes identifying interpretations of observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              いくつかの結果、特に数値の結果については、結果の重要性を完全に理解するために解釈が必要です。 / For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

              Alternate NamesAbnormal Flag
              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              150. Observation.component.referenceRange
              Definition

              通常または推奨範囲と比較して、値を解釈する方法に関するガイダンス。 / Guidance on how to interpret the value by comparison to a normal or recommended range.

              Shortコンポーネント結果の解釈のためのガイドを提供します / Provides guide for interpretation of component result
              Comments

              ほとんどの観測には、一般的な参照範囲が1つしかありません。システムは、患者に関する知識(患者の年齢、性別、体重、その他の要因に固有)に基づいて、関連する参照範囲のみを供給することを制限することを選択できますが、これは不可能または適切ではない場合があります。複数の参照範囲が提供される場合は、それらの間の違いを参照範囲および/または年齢特性で提供する必要があります。 / Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

              Control0..*
              TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
              Is Modifierfalse
              Summaryfalse
              Requirements

              どの値が「正常」と見なされるかを知ることは、特定の結果の重要性を評価するのに役立ちます。さまざまなコンテキストに複数の参照範囲を提供できる必要があります。 / Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

              Invariantsele-1: すべてのFHIR要素には、@valueまたは子供が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))