HL7 FHIR JP Core ImplementationGuide
1.2.0-a - release Japan flag

HL7 FHIR JP Core ImplementationGuide - Local Development build (v1.2.0-a) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Data Type Profile: JP_MedicationRange_UnitOfTime - Detailed Descriptions

Active as of 2023-10-31

Definitions for the jp-medicationrange-unitoftime data type profile.

Guidance on how to interpret the contents of this table can be found here

0. Range
Definition

範囲指定された時間の上限下限

Short範囲指定された時間の上限下限
Comments

時間の上限量、下限量の範囲を持っている。単位指定された数量を割り当てている。Low,Highの値は時間の単位当てはめる。

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rng-2: 存在する場合、低い値は高よりも低い値を持つものとします / If present, low SHALL have a lower value than high (low.empty() or high.empty() or (low <= high))
2. Range.id
Definition

リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short要素間参照のための一意のID / Unique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Range.extension
Definition

要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short実装で定義された追加のコンテンツ / Additional content defined by implementations
Comments

拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Range.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Range.low
    Definition

    低制限。境界は包括的です。 / The low limit. The boundary is inclusive.

    Short時間範囲(下限)
    Comments

    低要素が欠落している場合、低境界は不明です。 / If the low element is missing, the low boundary is not known.

    Control0..1
    TypeQuantity(SimpleQuantity)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Range.low.id
    Definition

    リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    Short要素間参照のための一意のID / Unique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    10. Range.low.extension
    Definition

    要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    Short実装で定義された追加のコンテンツ / Additional content defined by implementations
    Comments

    拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Range.low.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 12. Range.low.value
      Definition

      時間範囲(下限)

      Short時間範囲(下限)
      Comments

      値の暗黙の精度は常に尊重されるべきです。金銭的価値には、精度を処理するための独自のルールがあります(標準的な会計の教科書を参照)。 / The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Range.low.comparator
      Definition

      この文脈で使用することは許可されていません / Not allowed to be used in this context

      Short<|<= |> = |> - 価値を理解する方法 / < | <= | >= | > - how to understand the value
      Control0..0
      BindingThe codes SHALL be taken from QuantityComparator
      (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

      量を理解し、表現する方法。 / How the Quantity should be understood and represented.

      Typecode
      Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      測定方法の制限があるため、値が<5ug/Lまたは> 400mg/Lの測定値を処理するためのフレームワークが必要です。 / Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

      Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Range.low.unit
      Definition

      ユニットの人間の読み取り可能な形式。 / A human-readable form of the unit.

      Short単位時間の単位
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      測定単位には多くの表現があり、多くのコンテキストでは、特定の表現が固定され、必要です。すなわちマイクログラム用MCG。 / There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Range.low.system
      Definition

      UCUMを識別するURL。固定値。

      ShortUCUMを識別するURL
      Control0..1
      This element is affected by the following invariants: qty-3
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      ユニットのコード化された形式を定義するシステムを知る必要があります。 / Need to know the system that defines the coded form of the unit.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Range.low.code
      Definition

      一部のユニット表現システムのユニットのコンピューター処理可能な形式。 / A computer processable form of the unit in some unit representation system.

      Shortユニットのコード化された形式 / Coded form of the unit
      Comments

      優先システムはUCUMですが、独自の単位にはSNOMED-CT、または通貨にISO 4217を使用することもできます。使用のコンテキストには、特定のシステムからのコードがさらに必要になる場合があります。 / The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

      Control0..1
      BindingThe codes SHOULD be taken from UnitsOfTime
      (preferred to http://hl7.org/fhir/ValueSet/units-of-time)
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Range.high
      Definition

      高制限。境界は包括的です。 / The high limit. The boundary is inclusive.

      Short時間範囲(上限)
      Comments

      高い要素が欠落している場合、高境界は不明です。 / If the high element is missing, the high boundary is not known.

      Control0..1
      TypeQuantity(SimpleQuantity)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Range.high.id
      Definition

      リソース内の要素の一意のID(内部参照用)。これは、スペースを含まない文字列値である場合があります。 / Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      Short要素間参照のための一意のID / Unique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      26. Range.high.extension
      Definition

      要素の基本的な定義の一部ではない追加情報を表すために使用できます。拡張機能を安全で管理しやすくするために、拡張機能の定義と使用に適用される厳格なガバナンスセットがあります。実装者は拡張機能を定義できますが、拡張機能の定義の一部として満たされる一連の要件があります。 / May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      Short実装で定義された追加のコンテンツ / Additional content defined by implementations
      Comments

      拡張機能を使用または定義する機関や管轄権に関係なく、アプリケーション、プロジェクト、または標準による拡張機能の使用に関連するスティグマはありません。拡張機能の使用は、FHIR仕様がすべての人にコアレベルのシンプルさを保持できるようにするものです。 / There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: 両方ではなく、拡張または値[x]が必要です / Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Range.high.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 28. Range.high.value
        Definition

        時間範囲(上限)

        Short時間範囲(上限)
        Comments

        値の暗黙の精度は常に尊重されるべきです。金銭的価値には、精度を処理するための独自のルールがあります(標準的な会計の教科書を参照)。 / The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books).

        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        精度は、測定のほとんどすべての場合に暗黙的に処理されます。 / Precision is handled implicitly in almost all cases of measurement.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Range.high.comparator
        Definition

        この文脈で使用することは許可されていません / Not allowed to be used in this context

        Short<|<= |> = |> - 価値を理解する方法 / < | <= | >= | > - how to understand the value
        Control0..0
        BindingThe codes SHALL be taken from QuantityComparator
        (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)

        量を理解し、表現する方法。 / How the Quantity should be understood and represented.

        Typecode
        Is Modifiertrue because これは、コンパレータが値の解釈を大幅に変更するため、「IS修飾子」とラベル付けされています。コンパレータがない場合、値の変更はありません / This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        測定方法の制限があるため、値が<5ug/Lまたは> 400mg/Lの測定値を処理するためのフレームワークが必要です。 / Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology.

        Meaning if Missingコンパレータがない場合、値の変更はありません / If there is no comparator, then there is no modification of the value
        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Range.high.unit
        Definition

        ユニットの人間の読み取り可能な形式。 / A human-readable form of the unit.

        Short単位時間の単位
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        測定単位には多くの表現があり、多くのコンテキストでは、特定の表現が固定され、必要です。すなわちマイクログラム用MCG。 / There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Range.high.system
        Definition

        UCUMを識別するURL。固定値。

        ShortUCUMを識別するURL
        Control0..1
        This element is affected by the following invariants: qty-3
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        ユニットのコード化された形式を定義するシステムを知る必要があります。 / Need to know the system that defines the coded form of the unit.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Range.high.code
        Definition

        一部のユニット表現システムのユニットのコンピューター処理可能な形式。 / A computer processable form of the unit in some unit representation system.

        Shortユニットのコード化された形式 / Coded form of the unit
        Comments

        優先システムはUCUMですが、独自の単位にはSNOMED-CT、または通貨にISO 4217を使用することもできます。使用のコンテキストには、特定のシステムからのコードがさらに必要になる場合があります。 / The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system.

        Control0..1
        BindingThe codes SHOULD be taken from UnitsOfTime
        (preferred to http://hl7.org/fhir/ValueSet/units-of-time)
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        すべてのフォームに固定されたユニットの計算可能な形式が必要です。UCUMはこれを数量で提供しますが、Snomed CTは多くの関心のある単位を提供します。 / Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest.

        Invariantsele-1: すべてのFHIR要素には、@valueまたは子要素が必要です / All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        本実装ガイドへのご質問・ご指摘については、GitHub IssueおよびGitHub PullRequestにて受け付けている。